window:
  padding:
    x: 18  # 1 ch
    y: 10  # 1 lh

font:
  normal:
    family: monospace # 'DejaVu Sans Mono'
    style: Regular
  bold:
    family: monospace
    style: Bold
  italic:
    family: monospace
    style: Italic

  size: 13.0

  offset:
    x: 0
    y: 4  # line-margin

  glyph_offset:
    x: 0
    y: 4

colors:
  primary:
    background: '0x000000'
    foreground: '0x00ff00'

  #selection:
  #  text: '0xeaeaea'
  #  background: '0x404040'

  # Normal colors
  #normal:
  #  black:   '0x000000'
  #  red:     '0xd54e53'
  #  green:   '0xb9ca4a'
  #  yellow:  '0xe6c547'
  #  blue:    '0x7aa6da'
  #  magenta: '0xc397d8'
  #  cyan:    '0x70c0ba'
  #  white:   '0xececec'

  # Bright colors
  #bright:
  #  black:   '0x666666'
  #  red:     '0xff3334'
  #  green:   '0x9ec400'
  #  yellow:  '0xe7c547'
  #  blue:    '0x7aa6da'
  #  magenta: '0xb77ee0'
  #  cyan:    '0x54ced6'
  #  white:   '0xffffff'

  # Dim colors
  #
  # If the dim colors are not set, they will be calculated automatically based
  # on the `normal` colors.
  #dim:
  #  black:   '0x000000'
  #  red:     '0x8c3336'
  #  green:   '0x7a8530'
  #  yellow:  '0x97822e'
  #  blue:    '0x506d8f'
  #  magenta: '0x80638e'
  #  cyan:    '0x497e7a'
  #  white:   '0x9a9a9a'

  # Indexed Colors
  #
  # The indexed colors include all colors from 16 to 256.
  # When these are not set, they're filled with sensible defaults.
  #
  # Example:
  #   `- { index: 16, color: '0xff00ff' }`
  #
  #indexed_colors: []

# Visual Bell
#
# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
# rung, the terminal background will be set to white and transition back to the
# default background color. You can control the rate of this transition by
# setting the `duration` property (represented in milliseconds). You can also
# configure the transition function by setting the `animation` property.
#
# Values for `animation`:
#   - Ease
#   - EaseOut
#   - EaseOutSine
#   - EaseOutQuad
#   - EaseOutCubic
#   - EaseOutQuart
#   - EaseOutQuint
#   - EaseOutExpo
#   - EaseOutCirc
#   - Linear
#
# Specifying a `duration` of `0` will disable the visual bell.
#visual_bell:
#  animation: EaseOutExpo
#  duration: 0
#  color: '0xffffff'

# Background opacity
#
# Window opacity as a floating point number from `0.0` to `1.0`.
# The value `0.0` is completely transparent and `1.0` is opaque.
#background_opacity: 1.0

#selection:
  #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"

  # When set to `true`, selected text will be copied to the primary clipboard.
  #save_to_clipboard: false

# Allow terminal applications to change Alacritty's window title.
#dynamic_title: true

#cursor:
  # Cursor style
  #
  # Values for `style`:
  #   - ▇ Block
  #   - _ Underline
  #   - | Beam
  #style: Block

  # If this is `true`, the cursor will be rendered as a hollow box when the
  # window is not focused.
  #unfocused_hollow: true

# Live config reload (changes require restart)
#live_config_reload: true

# Shell
#
# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
# Entries in `shell.args` are passed unmodified as arguments to the shell.
#
# Default:
#   - (macOS) /bin/bash --login
#   - (Linux/BSD) user login shell
#   - (Windows) powershell
#shell:
#  program: /bin/bash
#  args:
#    - --login

# Startup directory
#
# Directory the shell is started in. If this is unset, or `None`, the working
# directory of the parent process will be used.
#working_directory: None

# WinPTY backend (Windows only)
#
# Alacritty defaults to using the newer ConPTY backend if it is available,
# since it resolves a lot of bugs and is quite a bit faster. If it is not
# available, the the WinPTY backend will be used instead.
#
# Setting this option to `true` makes Alacritty use the legacy WinPTY backend,
# even if the ConPTY backend is available.
#winpty_backend: false

# Send ESC (\x1b) before characters when alt is pressed.
#alt_send_esc: true

#debug:
  # Display the time it takes to redraw each frame.
  #render_timer: false

  # Keep the log file after quitting Alacritty.
  #persistent_logging: false

  # Log level
  #
  # Values for `log_level`:
  #   - None
  #   - Error
  #   - Warn
  #   - Info
  #   - Debug
  #   - Trace
  #log_level: Warn

  # Print all received window events.
  #print_events: false

  # Record all characters and escape sequences as test data.
  #ref_test: false

#mouse:
  # Click settings
  #
  # The `double_click` and `triple_click` settings control the time
  # alacritty should wait for accepting multiple clicks as one double
  # or triple click.
  #double_click: { threshold: 300 }
  #triple_click: { threshold: 300 }

  # If this is `true`, the cursor is temporarily hidden when typing.
  #hide_when_typing: false

  #url:
    # URL launcher
    #
    # This program is executed when clicking on a text which is recognized as a URL.
    # The URL is always added to the command as the last parameter.
    #
    # When set to `None`, URL launching will be disabled completely.
    #
    # Default:
    #   - (macOS) open
    #   - (Linux/BSD) xdg-open
    #   - (Windows) explorer
    #launcher:
    #  program: xdg-open
    #  args: []

    # URL modifiers
    #
    # These are the modifiers that need to be held down for opening URLs when clicking
    # on them. The available modifiers are documented in the key binding section.
    #modifiers: None

# Mouse bindings
#
# Mouse bindings are specified as a list of objects, much like the key
# bindings further below.
#
# Each mouse binding will specify a:
#
# - `mouse`:
#
#   - Middle
#   - Left
#   - Right
#   - Numeric identifier such as `5`
#
# - `action` (see key bindings)
#
# And optionally:
#
# - `mods` (see key bindings)
#mouse_bindings:
#  - { mouse: Middle, action: PasteSelection }

# Key bindings
#
# Key bindings are specified as a list of objects. For example, this is the
# default paste binding:
#
# `- { key: V, mods: Control|Shift, action: Paste }`
#
# Each key binding will specify a:
#
# - `key`: Identifier of the key pressed
#
#    - A-Z
#    - F1-F24
#    - Key0-Key9
#
#    A full list with available key codes can be found here:
#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
#
#    Instead of using the name of the keys, the `key` field also supports using
#    the scancode of the desired key. Scancodes have to be specified as a
#    decimal number. This command will allow you to display the hex scancodes
#    for certain keys:
#
#       `showkey --scancodes`.
#
# Then exactly one of:
#
# - `chars`: Send a byte sequence to the running application
#
#    The `chars` field writes the specified string to the terminal. This makes
#    it possible to pass escape sequences. To find escape codes for bindings
#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
#    of tmux. Note that applications use terminfo to map escape sequences back
#    to keys. It is therefore required to update the terminfo when changing an
#    escape sequence.
#
# - `action`: Execute a predefined action
#
#   - Copy
#   - Paste
#   - PasteSelection
#   - IncreaseFontSize
#   - DecreaseFontSize
#   - ResetFontSize
#   - ScrollPageUp
#   - ScrollPageDown
#   - ScrollLineUp
#   - ScrollLineDown
#   - ScrollToTop
#   - ScrollToBottom
#   - ClearHistory
#   - Hide
#   - Minimize
#   - Quit
#   - ToggleFullscreen
#   - SpawnNewInstance
#   - ClearLogNotice
#   - ReceiveChar
#   - None
#
#   (macOS only):
#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
#
# - `command`: Fork and execute a specified command plus arguments
#
#    The `command` field must be a map containing a `program` string and an
#    `args` array of command line parameter strings. For example:
#       `{ program: "alacritty", args: ["-e", "vttest"] }`
#
# And optionally:
#
# - `mods`: Key modifiers to filter binding actions
#
#    - Command
#    - Control
#    - Option
#    - Super
#    - Shift
#    - Alt
#
#    Multiple `mods` can be combined using `|` like this:
#       `mods: Control|Shift`.
#    Whitespace and capitalization are relevant and must match the example.
#
# - `mode`: Indicate a binding for only specific terminal reported modes
#
#    This is mainly used to send applications the correct escape sequences
#    when in different modes.
#
#    - AppCursor
#    - AppKeypad
#    - Alt
#
#    A `~` operator can be used before a mode to apply the binding whenever
#    the mode is *not* active, e.g. `~Alt`.
#
# Bindings are always filled by default, but will be replaced when a new
# binding with the same triggers is defined. To unset a default binding, it can
# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
# a no-op if you do not wish to receive input characters for that binding.
key_bindings:
  - { key: V,        mods: Super, action: Paste            }
  - { key: C,        mods: Super, action: Copy             }

  # (Windows only)
  #- { key: Return,   mods: Alt,           action: ToggleFullscreen }

  # (macOS only)
  #- { key: Key0,   mods: Command,         action: ResetFontSize    }
  #- { key: Equals, mods: Command,         action: IncreaseFontSize }
  #- { key: Add,    mods: Command,         action: IncreaseFontSize }
  #- { key: Minus,  mods: Command,         action: DecreaseFontSize }
  #- { key: K,      mods: Command,         action: ClearHistory     }
  #- { key: K,      mods: Command,         chars: "\x0c"            }
  #- { key: V,      mods: Command,         action: Paste            }
  #- { key: C,      mods: Command,         action: Copy             }
  #- { key: H,      mods: Command,         action: Hide             }
  #- { key: M,      mods: Command,         action: Minimize         }
  #- { key: Q,      mods: Command,         action: Quit             }
  #- { key: W,      mods: Command,         action: Quit             }
  #- { key: F,      mods: Command|Control, action: ToggleFullscreen }

  #- { key: Paste,                    action: Paste                            }
  #- { key: Copy,                     action: Copy                             }
  #- { key: L,         mods: Control, action: ClearLogNotice                   }
  #- { key: L,         mods: Control, chars: "\x0c"                            }
  #- { key: PageUp,    mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
  #- { key: PageDown,  mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
  #- { key: Home,      mods: Shift,   action: ScrollToTop,    mode: ~Alt       }
  #- { key: End,       mods: Shift,   action: ScrollToBottom, mode: ~Alt       }