Set self-adjusting deadline for connection writing (#16068)
* Set self-adjusting deadline for connection writing In #16055 it appears that the simple 5s deadline doesn't work for large file writes. Now we can't - or at least shouldn't just set no deadline as go will happily let these connections block indefinitely. However, what seems reasonable is to set some minimum rate we expect for writing. This PR suggests the following algorithm: * Every write has a minimum timeout of 5s (adjustable at compile time.) * If there has been a previous write - then consider its previous deadline, add half of the minimum timeout + 2s per kb about to written. * If that new deadline is after the minimum timeout use that. Fix #16055 * Linearly increase timeout * Make PerWriteTimeout, PerWritePerKbTimeouts configurable Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: 6543 <6543@obermui.de>
This commit is contained in:
zeripath
GitHub
parent
86e2789960
commit
daa5a23548
|
|
@ -51,6 +51,12 @@ RUN_MODE = ; prod
|
|||
;REDIRECT_OTHER_PORT = false
|
||||
;PORT_TO_REDIRECT = 80
|
||||
;;
|
||||
;; Timeout for any write to the connection. (Set to 0 to disable all timeouts.)
|
||||
;PER_WRITE_TIMEOUT = 30s
|
||||
;;
|
||||
;; Timeout per Kb written to connections.
|
||||
;PER_WRITE_PER_KB_TIMEOUT = 30s
|
||||
;;
|
||||
;; Permission for unix socket
|
||||
;UNIX_SOCKET_PERMISSION = 666
|
||||
;;
|
||||
|
|
@ -144,6 +150,14 @@ RUN_MODE = ; prod
|
|||
;; Enable exposure of SSH clone URL to anonymous visitors, default is false
|
||||
;SSH_EXPOSE_ANONYMOUS = false
|
||||
;;
|
||||
;; Timeout for any write to ssh connections. (Set to 0 to disable all timeouts.)
|
||||
;; Will default to the PER_WRITE_TIMEOUT.
|
||||
;SSH_PER_WRITE_TIMEOUT = 30s
|
||||
;;
|
||||
;; Timeout per Kb written to ssh connections.
|
||||
;; Will default to the PER_WRITE_PER_KB_TIMEOUT.
|
||||
;SSH_PER_WRITE_PER_KB_TIMEOUT = 30s
|
||||
;;
|
||||
;; Indicate whether to check minimum key size with corresponding type
|
||||
;MINIMUM_KEY_SIZE_CHECK = false
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -251,6 +251,9 @@ The following configuration set `Content-Type: application/vnd.android.package-a
|
|||
most cases you do not need to change the default value. Alter it only if
|
||||
your SSH server node is not the same as HTTP node. Do not set this variable
|
||||
if `PROTOCOL` is set to `unix`.
|
||||
- `PER_WRITE_TIMEOUT`: **30s**: Timeout for any write to the connection. (Set to 0 to
|
||||
disable all timeouts.)
|
||||
- `PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to connections.
|
||||
|
||||
- `DISABLE_SSH`: **false**: Disable SSH feature when it's not available.
|
||||
- `START_SSH_SERVER`: **false**: When enabled, use the built-in SSH server.
|
||||
|
|
@ -274,6 +277,9 @@ The following configuration set `Content-Type: application/vnd.android.package-a
|
|||
- `SSH_KEY_TEST_PATH`: **/tmp**: Directory to create temporary files in when testing public keys using ssh-keygen, default is the system temporary directory.
|
||||
- `SSH_KEYGEN_PATH`: **ssh-keygen**: Path to ssh-keygen, default is 'ssh-keygen' which means the shell is responsible for finding out which one to call.
|
||||
- `SSH_EXPOSE_ANONYMOUS`: **false**: Enable exposure of SSH clone URL to anonymous visitors, default is false.
|
||||
- `SSH_PER_WRITE_TIMEOUT`: **30s**: Timeout for any write to the SSH connections. (Set to
|
||||
0 to disable all timeouts.)
|
||||
- `SSH_PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to SSH connections.
|
||||
- `MINIMUM_KEY_SIZE_CHECK`: **true**: Indicate whether to check minimum key size with corresponding type.
|
||||
|
||||
- `OFFLINE_MODE`: **false**: Disables use of CDN for static files and Gravatar for profile pictures.
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ import (
|
|||
"time"
|
||||
|
||||
"code.gitea.io/gitea/modules/log"
|
||||
"code.gitea.io/gitea/modules/setting"
|
||||
)
|
||||
|
||||
var (
|
||||
|
|
@ -26,11 +27,12 @@ var (
|
|||
DefaultWriteTimeOut time.Duration
|
||||
// DefaultMaxHeaderBytes default max header bytes
|
||||
DefaultMaxHeaderBytes int
|
||||
// PerWriteWriteTimeout timeout for writes
|
||||
PerWriteWriteTimeout = 30 * time.Second
|
||||
// PerWriteWriteTimeoutKbTime is a timeout taking account of how much there is to be written
|
||||
PerWriteWriteTimeoutKbTime = 10 * time.Second
|
||||
)
|
||||
|
||||
// PerWriteWriteTimeout timeout for writes
|
||||
const PerWriteWriteTimeout = 5 * time.Second
|
||||
|
||||
func init() {
|
||||
DefaultMaxHeaderBytes = 0 // use http.DefaultMaxHeaderBytes - which currently is 1 << 20 (1MB)
|
||||
}
|
||||
|
|
@ -40,14 +42,16 @@ type ServeFunction = func(net.Listener) error
|
|||
|
||||
// Server represents our graceful server
|
||||
type Server struct {
|
||||
network string
|
||||
address string
|
||||
listener net.Listener
|
||||
wg sync.WaitGroup
|
||||
state state
|
||||
lock *sync.RWMutex
|
||||
BeforeBegin func(network, address string)
|
||||
OnShutdown func()
|
||||
network string
|
||||
address string
|
||||
listener net.Listener
|
||||
wg sync.WaitGroup
|
||||
state state
|
||||
lock *sync.RWMutex
|
||||
BeforeBegin func(network, address string)
|
||||
OnShutdown func()
|
||||
PerWriteTimeout time.Duration
|
||||
PerWritePerKbTimeout time.Duration
|
||||
}
|
||||
|
||||
// NewServer creates a server on network at provided address
|
||||
|
|
@ -58,11 +62,13 @@ func NewServer(network, address, name string) *Server {
|
|||
log.Info("Starting new %s server: %s:%s on PID: %d", name, network, address, os.Getpid())
|
||||
}
|
||||
srv := &Server{
|
||||
wg: sync.WaitGroup{},
|
||||
state: stateInit,
|
||||
lock: &sync.RWMutex{},
|
||||
network: network,
|
||||
address: address,
|
||||
wg: sync.WaitGroup{},
|
||||
state: stateInit,
|
||||
lock: &sync.RWMutex{},
|
||||
network: network,
|
||||
address: address,
|
||||
PerWriteTimeout: setting.PerWriteTimeout,
|
||||
PerWritePerKbTimeout: setting.PerWritePerKbTimeout,
|
||||
}
|
||||
|
||||
srv.BeforeBegin = func(network, addr string) {
|
||||
|
|
@ -224,9 +230,11 @@ func (wl *wrappedListener) Accept() (net.Conn, error) {
|
|||
closed := int32(0)
|
||||
|
||||
c = wrappedConn{
|
||||
Conn: c,
|
||||
server: wl.server,
|
||||
closed: &closed,
|
||||
Conn: c,
|
||||
server: wl.server,
|
||||
closed: &closed,
|
||||
perWriteTimeout: wl.server.PerWriteTimeout,
|
||||
perWritePerKbTimeout: wl.server.PerWritePerKbTimeout,
|
||||
}
|
||||
|
||||
wl.server.wg.Add(1)
|
||||
|
|
@ -249,13 +257,23 @@ func (wl *wrappedListener) File() (*os.File, error) {
|
|||
|
||||
type wrappedConn struct {
|
||||
net.Conn
|
||||
server *Server
|
||||
closed *int32
|
||||
server *Server
|
||||
closed *int32
|
||||
deadline time.Time
|
||||
perWriteTimeout time.Duration
|
||||
perWritePerKbTimeout time.Duration
|
||||
}
|
||||
|
||||
func (w wrappedConn) Write(p []byte) (n int, err error) {
|
||||
if PerWriteWriteTimeout > 0 {
|
||||
_ = w.Conn.SetWriteDeadline(time.Now().Add(PerWriteWriteTimeout))
|
||||
if w.perWriteTimeout > 0 {
|
||||
minTimeout := time.Duration(len(p)/1024) * w.perWritePerKbTimeout
|
||||
minDeadline := time.Now().Add(minTimeout).Add(w.perWriteTimeout)
|
||||
|
||||
w.deadline = w.deadline.Add(minTimeout)
|
||||
if minDeadline.After(w.deadline) {
|
||||
w.deadline = minDeadline
|
||||
}
|
||||
_ = w.Conn.SetWriteDeadline(w.deadline)
|
||||
}
|
||||
return w.Conn.Write(p)
|
||||
}
|
||||
|
|
|
|||
|
|
@ -117,6 +117,8 @@ var (
|
|||
GracefulRestartable bool
|
||||
GracefulHammerTime time.Duration
|
||||
StartupTimeout time.Duration
|
||||
PerWriteTimeout = 30 * time.Second
|
||||
PerWritePerKbTimeout = 10 * time.Second
|
||||
StaticURLPrefix string
|
||||
AbsoluteAssetURL string
|
||||
|
||||
|
|
@ -147,18 +149,22 @@ var (
|
|||
TrustedUserCAKeys []string `ini:"SSH_TRUSTED_USER_CA_KEYS"`
|
||||
TrustedUserCAKeysFile string `ini:"SSH_TRUSTED_USER_CA_KEYS_FILENAME"`
|
||||
TrustedUserCAKeysParsed []gossh.PublicKey `ini:"-"`
|
||||
PerWriteTimeout time.Duration `ini:"SSH_PER_WRITE_TIMEOUT"`
|
||||
PerWritePerKbTimeout time.Duration `ini:"SSH_PER_WRITE_PER_KB_TIMEOUT"`
|
||||
}{
|
||||
Disabled: false,
|
||||
StartBuiltinServer: false,
|
||||
Domain: "",
|
||||
Port: 22,
|
||||
ServerCiphers: []string{"aes128-ctr", "aes192-ctr", "aes256-ctr", "aes128-gcm@openssh.com", "arcfour256", "arcfour128"},
|
||||
ServerKeyExchanges: []string{"diffie-hellman-group1-sha1", "diffie-hellman-group14-sha1", "ecdh-sha2-nistp256", "ecdh-sha2-nistp384", "ecdh-sha2-nistp521", "curve25519-sha256@libssh.org"},
|
||||
ServerMACs: []string{"hmac-sha2-256-etm@openssh.com", "hmac-sha2-256", "hmac-sha1", "hmac-sha1-96"},
|
||||
KeygenPath: "ssh-keygen",
|
||||
MinimumKeySizeCheck: true,
|
||||
MinimumKeySizes: map[string]int{"ed25519": 256, "ed25519-sk": 256, "ecdsa": 256, "ecdsa-sk": 256, "rsa": 2048},
|
||||
ServerHostKeys: []string{"ssh/gitea.rsa", "ssh/gogs.rsa"},
|
||||
Disabled: false,
|
||||
StartBuiltinServer: false,
|
||||
Domain: "",
|
||||
Port: 22,
|
||||
ServerCiphers: []string{"aes128-ctr", "aes192-ctr", "aes256-ctr", "aes128-gcm@openssh.com", "arcfour256", "arcfour128"},
|
||||
ServerKeyExchanges: []string{"diffie-hellman-group1-sha1", "diffie-hellman-group14-sha1", "ecdh-sha2-nistp256", "ecdh-sha2-nistp384", "ecdh-sha2-nistp521", "curve25519-sha256@libssh.org"},
|
||||
ServerMACs: []string{"hmac-sha2-256-etm@openssh.com", "hmac-sha2-256", "hmac-sha1", "hmac-sha1-96"},
|
||||
KeygenPath: "ssh-keygen",
|
||||
MinimumKeySizeCheck: true,
|
||||
MinimumKeySizes: map[string]int{"ed25519": 256, "ed25519-sk": 256, "ecdsa": 256, "ecdsa-sk": 256, "rsa": 2048},
|
||||
ServerHostKeys: []string{"ssh/gitea.rsa", "ssh/gogs.rsa"},
|
||||
PerWriteTimeout: PerWriteTimeout,
|
||||
PerWritePerKbTimeout: PerWritePerKbTimeout,
|
||||
}
|
||||
|
||||
// Security settings
|
||||
|
|
@ -612,6 +618,8 @@ func NewContext() {
|
|||
GracefulRestartable = sec.Key("ALLOW_GRACEFUL_RESTARTS").MustBool(true)
|
||||
GracefulHammerTime = sec.Key("GRACEFUL_HAMMER_TIME").MustDuration(60 * time.Second)
|
||||
StartupTimeout = sec.Key("STARTUP_TIMEOUT").MustDuration(0 * time.Second)
|
||||
PerWriteTimeout = sec.Key("PER_WRITE_TIMEOUT").MustDuration(PerWriteTimeout)
|
||||
PerWritePerKbTimeout = sec.Key("PER_WRITE_PER_KB_TIMEOUT").MustDuration(PerWritePerKbTimeout)
|
||||
|
||||
defaultAppURL := string(Protocol) + "://" + Domain
|
||||
if (Protocol == HTTP && HTTPPort != "80") || (Protocol == HTTPS && HTTPPort != "443") {
|
||||
|
|
@ -777,6 +785,8 @@ func NewContext() {
|
|||
}
|
||||
|
||||
SSH.ExposeAnonymous = sec.Key("SSH_EXPOSE_ANONYMOUS").MustBool(false)
|
||||
SSH.PerWriteTimeout = sec.Key("SSH_PER_WRITE_TIMEOUT").MustDuration(PerWriteTimeout)
|
||||
SSH.PerWritePerKbTimeout = sec.Key("SSH_PER_WRITE_PER_KB_TIMEOUT").MustDuration(PerWritePerKbTimeout)
|
||||
|
||||
if err = Cfg.Section("oauth2").MapTo(&OAuth2); err != nil {
|
||||
log.Fatal("Failed to OAuth2 settings: %v", err)
|
||||
|
|
|
|||
|
|
@ -7,12 +7,15 @@ package ssh
|
|||
import (
|
||||
"code.gitea.io/gitea/modules/graceful"
|
||||
"code.gitea.io/gitea/modules/log"
|
||||
"code.gitea.io/gitea/modules/setting"
|
||||
|
||||
"github.com/gliderlabs/ssh"
|
||||
)
|
||||
|
||||
func listen(server *ssh.Server) {
|
||||
gracefulServer := graceful.NewServer("tcp", server.Addr, "SSH")
|
||||
gracefulServer.PerWriteTimeout = setting.SSH.PerWriteTimeout
|
||||
gracefulServer.PerWritePerKbTimeout = setting.SSH.PerWritePerKbTimeout
|
||||
|
||||
err := gracefulServer.ListenAndServe(server.Serve)
|
||||
if err != nil {
|
||||
|
|
|
|||
Loading…
Reference in New Issue