- Add the 'correct' styling for column on the link account page, this
follows what was done for the login/register page in 629ca22a97.
- Move some if conditions to be outside of the container which allocates
space on the page, this ensures it's not being shown if it's not needed.
- Resolves#4844
`BranchName` provides the nearest branch of the requested `:commit`.
It's plenty fast on smaller repositories.
On larger repositories like nixpkgs, however, this can easily take 2-3
seconds on a modern machine on a NVMe.
For context, at the time of writing, nixpkgs has over 650k commits and
roughly 250 branches.
`BranchName` is used once in the whole view:
The cherry-pick target branch default selection.
And I believe that's a logic error, which is why this patch is so small.
The nearest branch of a given commit will always be a branch the commit
is already part of. The branch you most likely *don't* want to
cherry-pick to.
Sure, one can technically cherry-pick a commit onto the same branch, but
that simply results in an empty commit.
I don't believe this is intended and even less so worth the compute.
Instead, the cherry-pick branch selection suggestion now always uses
the default branch, which used to be the fallback.
If a user wants to know which branches contain the given commit,
`load-branches-and-tags` exists and should be used instead.
Also, to add insult to injury, `BranchName` was calculated for both
logged-in and not logged-in users, despite its only consumer, the
cherry-pick operation, only being rendered when a given user has
write/commit permissions.
But this isn't particularly surprising, given this happens a lot in
Forgejo's codebase.
- Adjust the counting of the number of lines of a file to match the
amount of rendered lines. This simply means that a file with the content
of `a\n` will be shown as having `1 line` rather than `2 lines`. This
matches with the amount of lines that are being rendered (the last empty
line is never rendered) and matches more with the expecation of the
user (a trailing EOL is a technical detail).
- In the case there's no EOL, the reason why it was counting
'incorrectly' was to show if there was a trailing EOL or not, but now
text is shown to tell the user this.
- Integration test added.
- ResolvesCodeberg/Community#1612
An instance-wide actor is required for outgoing signed requests that are
done on behalf of the instance, rather than on behalf of other actors.
Such things include updating profile information, or fetching public
keys.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The previous commit laid out the foundation of the quota engine, this
one builds on top of it, and implements the actual enforcement.
Enforcement happens at the route decoration level, whenever possible. In
case of the API, when over quota, a 413 error is returned, with an
appropriate JSON payload. In case of web routes, a 413 HTML page is
rendered with similar information.
This implementation is for a **soft quota**: quota usage is checked
before an operation is to be performed, and the operation is *only*
denied if the user is already over quota. This makes it possible to go
over quota, but has the significant advantage of being practically
implementable within the current Forgejo architecture.
The goal of enforcement is to deny actions that can make the user go
over quota, and allow the rest. As such, deleting things should - in
almost all cases - be possible. A prime exemption is deleting files via
the web ui: that creates a new commit, which in turn increases repo
size, thus, is denied if the user is over quota.
Limitations
-----------
Because we generally work at a route decorator level, and rarely
look *into* the operation itself, `size:repos:public` and
`size:repos:private` are not enforced at this level, the engine enforces
against `size:repos:all`. This will be improved in the future.
AGit does not play very well with this system, because AGit PRs count
toward the repo they're opened against, while in the GitHub-style fork +
pull model, it counts against the fork. This too, can be improved in the
future.
There's very little done on the UI side to guard against going over
quota. What this patch implements, is enforcement, not prevention. The
UI will still let you *try* operations that *will* result in a denial.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This is an implementation of a quota engine, and the API routes to
manage its settings. This does *not* contain any enforcement code: this
is just the bedrock, the engine itself.
The goal of the engine is to be flexible and future proof: to be nimble
enough to build on it further, without having to rewrite large parts of
it.
It might feel a little more complicated than necessary, because the goal
was to be able to support scenarios only very few Forgejo instances
need, scenarios the vast majority of mostly smaller instances simply do
not care about. The goal is to support both big and small, and for that,
we need a solid, flexible foundation.
There are thee big parts to the engine: counting quota use, setting
limits, and evaluating whether the usage is within the limits. Sounds
simple on paper, less so in practice!
Quota counting
==============
Quota is counted based on repo ownership, whenever possible, because
repo owners are in ultimate control over the resources they use: they
can delete repos, attachments, everything, even if they don't *own*
those themselves. They can clean up, and will always have the permission
and access required to do so. Would we count quota based on the owning
user, that could lead to situations where a user is unable to free up
space, because they uploaded a big attachment to a repo that has been
taken private since. It's both more fair, and much safer to count quota
against repo owners.
This means that if user A uploads an attachment to an issue opened
against organization O, that will count towards the quota of
organization O, rather than user A.
One's quota usage stats can be queried using the `/user/quota` API
endpoint. To figure out what's eating into it, the
`/user/repos?order_by=size`, `/user/quota/attachments`,
`/user/quota/artifacts`, and `/user/quota/packages` endpoints should be
consulted. There's also `/user/quota/check?subject=<...>` to check
whether the signed-in user is within a particular quota limit.
Quotas are counted based on sizes stored in the database.
Setting quota limits
====================
There are different "subjects" one can limit usage for. At this time,
only size-based limits are implemented, which are:
- `size:all`: As the name would imply, the total size of everything
Forgejo tracks.
- `size:repos:all`: The total size of all repositories (not including
LFS).
- `size:repos:public`: The total size of all public repositories (not
including LFS).
- `size:repos:private`: The total size of all private repositories (not
including LFS).
- `sizeall`: The total size of all git data (including all
repositories, and LFS).
- `sizelfs`: The size of all git LFS data (either in private or
public repos).
- `size:assets:all`: The size of all assets tracked by Forgejo.
- `size:assets:attachments:all`: The size of all kinds of attachments
tracked by Forgejo.
- `size:assets:attachments:issues`: Size of all attachments attached to
issues, including issue comments.
- `size:assets:attachments:releases`: Size of all attachments attached
to releases. This does *not* include automatically generated archives.
- `size:assets:artifacts`: Size of all Action artifacts.
- `size:assets:packages:all`: Size of all Packages.
- `size:wiki`: Wiki size
Wiki size is currently not tracked, and the engine will always deem it
within quota.
These subjects are built into Rules, which set a limit on *all* subjects
within a rule. Thus, we can create a rule that says: "1Gb limit on all
release assets, all packages, and git LFS, combined". For a rule to
stand, the total sum of all subjects must be below the rule's limit.
Rules are in turn collected into groups. A group is just a name, and a
list of rules. For a group to stand, all of its rules must stand. Thus,
if we have a group with two rules, one that sets a combined 1Gb limit on
release assets, all packages, and git LFS, and another rule that sets a
256Mb limit on packages, if the user has 512Mb of packages, the group
will not stand, because the second rule deems it over quota. Similarly,
if the user has only 128Mb of packages, but 900Mb of release assets, the
group will not stand, because the combined size of packages and release
assets is over the 1Gb limit of the first rule.
Groups themselves are collected into Group Lists. A group list stands
when *any* of the groups within stand. This allows an administrator to
set conservative defaults, but then place select users into additional
groups that increase some aspect of their limits.
To top it off, it is possible to set the default quota groups a user
belongs to in `app.ini`. If there's no explicit assignment, the engine
will use the default groups. This makes it possible to avoid having to
assign each and every user a list of quota groups, and only those need
to be explicitly assigned who need a different set of groups than the
defaults.
If a user has any quota groups assigned to them, the default list will
not be considered for them.
The management APIs
===================
This commit contains the engine itself, its unit tests, and the quota
management APIs. It does not contain any enforcement.
The APIs are documented in-code, and in the swagger docs, and the
integration tests can serve as an example on how to use them.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Add an optional `order_by` parameter to the `user.ListMyRepos`
handler (which handles the `/api/v1/user/repos` route), allowing a user
to sort repos by name (the default), id, or size.
The latter will be useful later for figuring out which repos use most
space, which repos eat most into a user's quota.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- add package counter to repo/user/org overview pages
- add go unit tests for repo/user has/count packages
- add many more unit tests for packages model
- fix error for non-existing packages in DeletePackageByID and SetRepositoryLink
Document return type for the endpoints that fetch specific files from a
repository. This allows the swagger generated code to read the returned
data.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit bae87dfb0958e6a2920c905e51c2a026b7b71ca6)
- In the spirit of #4635
- Notify the owner when their account is getting enrolled into TOTP. The
message is changed according if they have security keys or not.
- Integration test added.
- Regression of #4635
- The authentication mails weren't being sent with links to the
instance, because the the wrong variable was used in the mail footer.
`$.AppUrl` should've been `AppUrl`.
- Unit test added.
- Currently if the password, primary mail, TOTP or security keys are
changed, no notification is made of that and makes compromising an
account a bit easier as it's essentially undetectable until the original
person tries to log in. Although other changes should be made as
well (re-authing before allowing a password change), this should go a
long way of improving the account security in Forgejo.
- Adds a mail notification for password and primary mail changes. For
the primary mail change, a mail notification is sent to the old primary
mail.
- Add a mail notification when TOTP or a security keys is removed, if no
other 2FA method is configured the mail will also contain that 2FA is
no longer needed to log into their account.
- `MakeEmailAddressPrimary` is refactored to the user service package,
as it now involves calling the mailer service.
- Unit tests added.
- Integration tests added.
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
(cherry picked from commit 416c36f3034e228a27258b5a8a15eec4e5e426ba)
Conflicts:
- tests/integration/auth_ldap_test.go
Trivial conflict resolved by manually applying the change.
- routers/web/auth/oauth.go
Technically not a conflict, but the original PR removed the
modules/util import, which in our version, is still in use. Added it
back.
Resolves https://github.com/go-gitea/gitea/issues/26996
Added default sorting for milestones by name.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
---
Conflict resolution: trivial, was due to the improvement made to 'the due
date sorting' strings.
(cherry picked from commit e8d4b7a8b198eca3b0bd117efb422d7d7cac93fe)
- The usage of the `vue-bar-graph` is complicated, because of the `GSAP`
dependency they pull in, the dependency uses a non-free license.
- The code is rewritten to use the `chart.js` library, which is already
used to draw other charts in the activity tab. Due to the limitation of
`chart.js`, we have to create a plugin in order to have images as labels
and do click handling for those images.
- The chart isn't the same as the previous one, once again simply due to
how `chart.js` works, the amount of commits isn't drawn anymore in the
bar, you instead have to hover over it or look at the y-axis.
- Resolves#4569
This aligns the popup width of the label selector during issue creation
to the width of the label selector in an already created issue.
(The inherited width from "ui form" is reset to prevent width: 100% on the
input element in the search box.)
- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
To reproduce:
- make the repo creation form return with an error, like a duplicate name
- click on the Object format dropdown
- the options are missing as the listbox is empty
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4360
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Solomon Victorino <git@solomonvictorino.com>
Co-committed-by: Solomon Victorino <git@solomonvictorino.com>
Changes
* checkbox titles are no longer strong.
* added descriptions to all options. Mostly from memory, but there are a few sources:
- https://docs.gitea.com/help/faq#active-user-vs-login-prohibited-user
- https://docs.gitea.com/help/faq#restricted-users
* for git hooks, I just moved tooltip into description.
* renamed titles. The only important one is: "Disable sign-in" -> "Suspended account" as it has a change of terminology. We don't seem to have anything about this option in our docs though. This is what the option really does. In fact, it does not invalidate current sessions of the user, but shows them the same "Sign-in prohibited" screen for all actions.
Preview: https://codeberg.org/attachments/e5649045-dfe8-4327-869f-cb2530ca6b17
(the text of the last one is slightly outdated after review)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4499
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
- Don't show the labels-list element, if no labels are selected.
- The labels-list was taking up vertical space, even if no labels were
selected which caused an inconsistency in how the sidebar looked.
- Adds integration test
Fixes https://codeberg.org/forgejo/forgejo/issues/4417 by adding a conditional branch to the `head_opengraph` template to match wiki pages. I tried to be consistent with the other types:
- `og:title` is the wiki page title
- `og:url` is built via `{{AppUrl}}{{.Link}}` like it is done for commit and file views. This has the caveat of doubling the slash (see test below). Should we `{{trimSuffix "/" AppUrl}}` to remove this, if sprig is available?
- `og:description` is the repository description to match GH behaviour. Also, the first sentences of the page might not be descriptive enough. Should we prefix the repo description with the repo name?
- `og:type` and `og:image` are common
Added a `TestOpenGraphProperties` integration test using existing fixtures. Coverage is not 100% but can be improved later.
## Output on a test repo
```html
<meta property="og:title" content="Project architecture">
<meta property="og:url" content="http://localhost:3000//xvello/wiki-test/wiki/Project-architecture">
<meta property="og:description" content="description for a test project">
<meta property="og:type" content="object">
<meta property="og:image" content="http://localhost:3000/avatars/3dd4d1e4eef065d1b4ad4bdb081ab6e7">
```
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4427
Co-authored-by: Xavier Vello <xavier.vello@gmail.com>
Co-committed-by: Xavier Vello <xavier.vello@gmail.com>
Add an empty hash `href="#"` attribute to anchors that did not yet have any `href` attribute, as a quick work-around to make those elements possible to interact with via keyboard. See discussion on linked issue (https://codeberg.org/forgejo/forgejo/issues/4273) for more information on how the button-like elements like this could eventually be improved even more.
Fixes https://codeberg.org/forgejo/forgejo/issues/4273.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4375
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: banaanihillo <banaanihillo@noreply.codeberg.org>
Co-committed-by: banaanihillo <banaanihillo@noreply.codeberg.org>
- Don't make checkpoints or radio inputs full width on a small screen,
these obviously shouldn't try to take up the whole width of a container.
- Wrap the label for organisation permission box inside a `<span
class="inline field">`, so it gets a left-margin from the `.inline.field
> :first-child` selector. This make the checkboxes and radio buttons
groups look indented from the left.
- Resolves#4361
This padding causes visual bug, because it only applies to the first line and not to the rest in case the line is broken into multiple.
I don't think it's actually needed here for good look, so I decided to remove it. In case decreased padding looks worse, the padding can be grown back via other element so it wouldn't cause this bug.
Preview: https://codeberg.org/attachments/56fd2ee8-4955-409d-998f-1feba987b9af
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4318
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
#3654 introduced support for searching non-default branches and tags.
However, the results page lacked any indicator (aside from the url) on which branch/tag the searcg was performed. A branch dropdown was introduced to the code search page when git-grep is used both as an indicator and as a intrusive way to switch between branches/tags.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4262
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Closes#2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
There are a few changes of template logic which defines when which elements should be shown on profile page. The motivation is to have the elements when needed and don't when they're not relevant.
## Changes
### RSS button
Now displayed if:
* feeds are enabled
AND one or more of:
* the current user is an admin
* the current user is viewing their profile
* the activity is publicly available
So, basically in cases when the .rss feed actually contains any events. Before this change this button was constantly shown and was giving an empty feed if it was unavailable.
### Public activity tab
The tab is displayed if:
* the current user is an admin
* the current user is viewing their profile
* the activity is publicly available
* the current tab is this exact tab, for example, in case it was accessed by adding `?tab=activity` to the URL, so that the UI is not broken w/o a highlighted tab
So, this tab is not displayed when it's not going to contain any information, but still can be accessed.
### Banner "This user has disabled the public visibility of the activity."
For admins:
* always show the big blue banner to warn that sharing a screenshot of this publicly is bad idea
For self:
* always display a little note about the current visibility status with a "Change" link
For others:
* only display a little note to explain why the activity is not shown
### Heatmap and activity feed
Elements are only displayed when relevant, instead of keeping empty leftovers, for easier testing. This template change is also covered by test. **Everything in this Changes section is covered by test unless I forgot something.**
## Preview
There's obviously too many states to screenshot, here are highlights:
_Warning admin for why they're seeing the information_
_Viewing self - private_
_Viewing self - public_
_Don't have access to the information_
_The tab is not shown when the activity can't be accessed_
_Can't access the RSS feed_
_Can access the RSS feed_
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4189
Reviewed-by: Otto <otto@codeberg.org>
Ports fuzzy search for `/issues` and `/pulls` from gitea.
Adds fuzzy search for `/user/repo/issues` and `/user/repo/pulls`.
---
## Notes
### Port: [`gitea#be5be0ac81`](be5be0ac81)
- CONFLICT (content): Merge conflict in routers/web/user/home.go
Conflict resolved by
1. keeping both `PageIsOrgIssues` and the newly introduced `IsFuzzy`
2. using `pager.AddParam(ctx, "fuzzy", "IsFuzzy")` rather than `pager.AddParamString("fuzzy", fmt.Sprintf("%v", isFuzzy))`
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping the changes from #4096, and picking the `&fuzzy=${{.IsFuzzy}}` inclusion to all urls and `{{if .PageIsPulls}}...`
### Port: [`gitea#fede3cbada`](fede3cbada)
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping previous changes and picking the replacement of `{{if .PageIsPulls}}...` with `{{template "shared/search/combo_fuzzy"...` which contains the replacement of `explorer.go` to `explorer.go_to`
### Fixup commit
replaces `Iif` with `if` which was introduced in gitea#fede3cbada
### Feature commit
adds in support for /user/repo/(issues|pulls) + test
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Kerwin Bryant <kerwin612@qq.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4160
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
More info in the linked PR.
---
Make positioning of the repo tabs make more sense. This is an isolated implementation for one of many changes discussed in the referenced issue, it will work good without the other changes too.
## Changes
- Actions are moved to the edge. This tab is the least relevant to both visitors and developers. The first don't really need it at all, the second only visit it when something goes unexpected (run did not happen or attached to the wrong event), or just to see the run queue to know when their actions is going to get processed. This is not a tab with always-relevant information.
- put Packages after releases. The Packages are like a download page for Releases, but for released packages instead of binaries/source code. It is relevant to Releases, so it should stay close, but it is secondary to Releases by importance. For example, because they don't actually contain release notes unlike Releases.
- the above makes Projects appear next to Issues and Pull requests which I think is nice as they're related.
## Preview
### v7
https://codeberg.org/attachments/c434e8fd-aaab-4c27-9071-2a3ba68ad4b7
### This PR
https://codeberg.org/attachments/74743c03-883e-40cf-8cb1-384d1d8cf63c
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4139
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Marcell Mars
