Within doArchive there is a service goroutine that performs the
archiving function. This goroutine reports its error using a `chan
error` called `done`. Prior to this PR this channel had 0 capacity
meaning that the goroutine would block until the `done` channel was
cleared - however there are a couple of ways in which this channel might
not be read.
The simplest solution is to add a single space of capacity to the
goroutine which will mean that the goroutine will always complete and
even if the `done` channel is not read it will be simply garbage
collected away.
(The PR also contains two other places when setting up the indexers
which do not leak but where the blocking of the sending goroutine is
also unnecessary and so we should just add a small amount of capacity
and let the sending goroutine complete as soon as it can.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
This follows
* https://github.com/go-gitea/gitea/issues/18553
Introduce `RunWithContextString` and `RunWithContextBytes` to help the refactoring. Add related unit tests. They keep the same behavior to save stderr into err.Error() as `RunInXxx` before.
Remove `RunInDirTimeoutPipeline` `RunInDirTimeoutFullPipeline` `RunInDirTimeout` `RunInDirTimeoutEnv` `RunInDirPipeline` `RunInDirFullPipeline` `RunTimeout`, `RunInDirTimeoutEnvPipeline`, `RunInDirTimeoutEnvFullPipeline`, `RunInDirTimeoutEnvFullPipelineFunc`.
Then remaining `RunInDir` `RunInDirBytes` `RunInDirWithEnv` can be easily refactored in next PR with a simple search & replace:
* before: `stdout, err := RunInDir(path)`
* next: `stdout, _, err := RunWithContextString(&git.RunContext{Dir:path})`
Other changes:
1. When `timeout <= 0`, use default. Because `timeout==0` is meaningless and could cause bugs. And now many functions becomes more simple, eg: `GitGcRepos` 9 lines to 1 line. `Fsck` 6 lines to 1 line.
2. Only set defaultCommandExecutionTimeout when the option `setting.Git.Timeout.Default > 0`
Strangely #19038 appears to relate to an issue whereby a tag appears to
be listed in `git show-ref --tags` but then does not appear when `git
show-ref --tags -- short_name` is called.
As a solution though I propose to stop the second call as it is
unnecessary and only likely to cause problems.
I've also noticed that the tags calls are wildly inefficient and aren't using the common cat-files - so these have been added.
I've also noticed that the git commit-graph is not being written on mirroring - so I've also added writing this to the migration which should improve mirror rendering somewhat.
Fix#19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds the necessary work to make it possible to create files on empty
repos using the API.
Fix#10993
Signed-off-by: Andrew Thornton <art27@cantab.net>
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
The adoption page checks directories to see if they are repositories by querying the
db on a per user basis. This can lead to problems if a user has a large number of
repositories or putative repositories.
This PR changes the buffering to check the db in IterataeBufferSize batches instead.
Fix#19137
Signed-off-by: Andrew Thornton <art27@cantab.net>
This code adds a simple endpoint to apply patches to repositories and
branches on gitea. This is then used along with the conflicting checking
code in #18004 to provide a basic implementation of cherry-pick revert.
Now because the buttons necessary for cherry-pick and revert have
required us to create a dropdown next to the Browse Source button
I've also implemented Create Branch and Create Tag operations.
Fix#3880Fix#17986
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Start adding mechanism to return unhandled data
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create pushback interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Pausable interface to WorkerPool and Manager
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and PushBack for the bytefifos
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and Pushback for ChannelQueues and ChannelUniqueQueues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Wire in UI for pausing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcases and fix a few issues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix build
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prevent "race" in the test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix jsoniter mismerge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix conflicts
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix format
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add warnings for no worker configurations and prevent data-loss with redis/levelqueue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use StopTimer
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
We need to use the cached .gitattributes file for checking if a file
should be stored in the lfs.
Fix#18297
Signed-off-by: Andrew Thornton <art27@cantab.net>
The total count returned by ListUnadoptedRepositories is incorrectly
calculated.
The code snippet within ListUnadoptedRepositories used to verify
unadopted repositories is repeated three times in the function. It is
moved in the checkUnadoptedRepositories function and a unit test is
added to verify it works as expected.
A unit test is added to verify the total count returned by
ListUnadoptedRepositories is as expected.
Signed-off-by: singuliere <singuliere@autistici.org>
* Move keys to models/keys
* Rename models/keys -> models/asymkey
* change the missed package name
* Fix package alias
* Fix test
* Fix docs
* Fix test
* Fix test
* merge
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
The current implementation of checkBranchName is highly inefficient
involving opening the repository, the listing all of the branch names
checking them individually before then using using opened repo to get
the tags.
This PR avoids this by simply walking the references from show-ref
instead of opening the repository (in the nogogit case).
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use a standalone struct name for Organization
* recover unnecessary change
* make the code readable
* Fix template failure
* Fix template failure
* Move HasMemberWithUserID to org
* Fix test
* Remove unnecessary user type check
* Fix test
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Update default branch if needed
- Update protected branch if needed
- Update all not merged pull request base branch name
- Rename git branch
- Record this rename work and auto redirect for old branch on ui
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: delvh <dev.lh@web.de>
99rgosse