Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
#28361 introduced `syncBranchToDB` in `CreateNewBranchFromCommit`. This
PR will revert the change because it's unnecessary. Every push will
already be checked by `syncBranchToDB`.
This PR also created a test to ensure it's right.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa243)
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds unit tests
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac14)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Earl Warren