- Switched to plain JavaScript
- Tested the image pasting functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit f390d5eb4f4db21eeacdf2e7a093f6bd4e87c96f)
- Switched to plain JavaScript
- Tested the installation page functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 4e536edaead97d61a64508db0e93cf781a889472)
- Use case in `repo-commit` was tested until the point where the POST
request was sent with the same payload.
- Use case in `repo-legacy` was tested completely with comment editing.
- `jquery/no-fade` was disabled as well to stay in sync with
`no-jquery/no-fade`, had no violations.
(cherry picked from commit a5c570c1e02302212a5d8f7cf7d91f24ab0578d5)
- Switched to plain JavaScript
- Tested the wiki creation form functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit ade1110e8b7d94dc142a259854e2b73845eab8b9)
- Switched to plain JavaScript
- Tested the repo migration form functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 100031f5f143a15c79ebbe1b77c86091e3b6d489)
- If a `logout` event is send the user should be redirected to the
homepage, there are three mechanism that can do this. The response of
`/user/logout` and the event listener of notifications or stopwatch.
It's essentially a race for what's processed first to determine which
mechanism takes care of redirecting the user.
- Fix that the redirection mechanism of the notification and stopwatch
event listener redirects to an absolute URL.
- Ref: #2135
- Switched to plain JavaScript
- Tested the repo migrate functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 5e1bf3efe2ad3ba6cd30db187ca59b94c3fcdafa)
Port of https://github.com/go-gitea/gitea/pull/29225. Reworked to not
use global click event listener.
---
- Switched to plain JavaScript
- Tested the repo release form functionality and it works as before
- Switched to plain JavaScript
- Tested the webhook editing functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 27192bc321161a4e648547bd7b071065a7b18326)
- Switched to plain JavaScript
- Tested the context popup functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit c282d378bd1f2f11ffc884cd6d7c073b7b5745f8)
This plugin has a few useful rules. The only thing I dislike about it is
that it pulls in a rather big number of dependencies for react-related
rules we don't use, but it can't really be avoided.
Rule docs:
https://github.com/github/eslint-plugin-github?tab=readme-ov-file#rules
(cherry picked from commit 26b17537e651fe93ef9b64f961633cb4c0b8c2c3)
- Switched to plain JavaScript
- Tested the quick submit functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit d8d4b33b31d959e4b600cc90a7fa1779b69cadf5)
- Switched to plain JavaScript
- Tested the organization rename prompt toggling functionality and it
works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 5902372e63db2d3f31150251dfffdb305fa9aaee)
- Switched to plain JavaScript
- Tested the SSH key title functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 236e12184404998c8edf7efa6de7fccf9d0ee814)
- Remove and prevent use of `body` argument, it is not used anywhere
- Remove uppercasing of method, we can require it to be uppercase
(cherry picked from commit c40ee6fb7382bc2d1398dc685f98a0277d3bfb68)
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c70f65e83bc1876fb368fd117d342573ff18a9e8)
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Switched to plain JavaScript
- Tested the task list functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 542480a9b0d5cdb497dbfa99752d59fd016df0d6)
- When a event is caused by `Ctrl+Enter` jQuery might not wrap the event
and in that case `originalEvent` is not defined. Check for this case.
- Log the error along with showing an toast.
- Resolves#2363
I'm using this convention in other projects and I think it makes sense
for gitea too because the vitest setup file is loaded globally for all
tests, not just ones in web_src, so it makes sense to be in the root.
(cherry picked from commit 98e7e3a5f07b8bc620e26bc1ab6f7a86bccbb7cb)
When setting `url.host` on a URL object with no port specified (like is
the case of default port), the resulting URL's port will not change.
Workaround this quirk in the URL standard by explicitely setting port
for the http and https protocols.
Extracted the logic to a function for the purpose of testing. Initially
I wanted to have the function in utils.js, but it turns out esbuild can
not treeshake the unused functions which would result in the
webcomponents chunk having all 2kB utils.js inlined, so it seemed not
worth.
Fixes: https://github.com/go-gitea/gitea/issues/29084
(cherry picked from commit b6bf8041d8e8ee845728687b1f358f1d482afff2)
Replaces `Gitea` with `Forgejo` in the default config settings for new installs.
This will not affect existing installs.
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/140
Co-authored-by: Caesar Schinas <caesar@noreply.codeberg.org>
Co-committed-by: Caesar Schinas <caesar@noreply.codeberg.org>
(cherry picked from commit ca1319aa16)
(cherry picked from commit 52a4d238a0)
(cherry picked from commit f63536538c)
Conflicts:
web_src/js/features/install.js
(cherry picked from commit 861cc434e1)
(cherry picked from commit 0e6ea60c80)
(cherry picked from commit 0cbc0ec15d)
(cherry picked from commit 3cc19b0ae2)
(cherry picked from commit 50fcb885fe)
(cherry picked from commit f6039d4df4)
(cherry picked from commit 5ae5c6ba2d)
(cherry picked from commit f0b565e0ed)
(cherry picked from commit adbd4d2015)
(cherry picked from commit d26c540ffd)
(cherry picked from commit 6df6781b42)
(cherry picked from commit b6fb56e1c4)
(cherry picked from commit bb4f98a0ca)
(cherry picked from commit 6779229f27)
(cherry picked from commit c216c85aee)
(cherry picked from commit dff780bced)
(cherry picked from commit 4e036aa3b6)
(cherry picked from commit 8b3bc3e8a6)
(cherry picked from commit 1e4d852332)
(cherry picked from commit 07a15d1844)
(cherry picked from commit fb44b3e10d)
(cherry picked from commit b212d83319)
(cherry picked from commit 5754971be5)
(cherry picked from commit 0c43b4e82c)
Conflicts:
routers/install/install.go
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 2e22a7208a)
(cherry picked from commit 676b0a8a48)
(cherry picked from commit bc4a8bf9bc)
(cherry picked from commit 5e09a4e174)
(cherry picked from commit 712c52a32a)
(cherry picked from commit ba3d93cc4a)
(cherry picked from commit a5a0396abc)
(cherry picked from commit 09b205f30b)
(cherry picked from commit 52b7729e86)
(cherry picked from commit bfe78735e8)
(cherry picked from commit 915c4f7a7b)
(cherry picked from commit 3b1af856bb)
(cherry picked from commit ffe2c0a353)
(cherry picked from commit fd5cc72128)
(cherry picked from commit 95d3555e47)
(cherry picked from commit b9b853f4b0)
(cherry picked from commit 967453eb6f)
(cherry picked from commit 3298f502dd)
(cherry picked from commit 3481d1f816)
(cherry picked from commit 7508c24a0c)
(cherry picked from commit 54e97f7c35)
(cherry picked from commit 492876992f)
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)
Update semantic version according to specification
(cherry picked from commit 22510f4130)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
(cherry picked from commit d7a77e35cc)
(cherry picked from commit cd8eb68ab7)
(cherry picked from commit 68487ac95f)
(cherry picked from commit 616dceb565)
(cherry picked from commit 545fe5975b)
(cherry picked from commit c042cf8eda)
(cherry picked from commit ae5e5a7468)
(cherry picked from commit 8034ef5fa2)
(cherry picked from commit aaf0293034)
(cherry picked from commit daafa8ce58)
(cherry picked from commit 7ca3681d3e)
(cherry picked from commit 39f72cba71)
(cherry picked from commit 60a5917130)
(cherry picked from commit 4853bd9e16)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d2)
(cherry picked from commit 11ae7f6e85)
(cherry picked from commit 25e96cfcb2)
(cherry picked from commit 6d8d19b391)
(cherry picked from commit 5afc5c454b)
(cherry picked from commit 86d07b4c24)
(cherry picked from commit e54d869fda)
(cherry picked from commit ab31ef1bba)
(cherry picked from commit 511cbca2f3)
(cherry picked from commit 333916fea8)
(cherry picked from commit 3802bcd7c9)
(cherry picked from commit 5d0fa034f7)
(cherry picked from commit d15627aa0d)
(cherry picked from commit ba0b21b930)
(cherry picked from commit 39ade66aac)
Behaviour now matches GH. Safeguard added in the for loop because
`textContent` may be null in which case it does not make sense to render
the copy button.
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Gitea treat JS errors seriously, so sometimes the JS errors caused by
3rdparty code (eg: browser extensions) would also be reported on Gitea
UI: TypeError: WeakMap key undefined (caused by extension DarkReader's
bug) #28861
To avoid fill the user's screen with a lot of error messages, this PR
merges the same error messages into one, like this:
```js
<div class="page-content">
<div class="... js-global-error" data-global-error-msg-compact="testmsg1" data-global-error-msg-count="2">test msg 1 (2)</div>
<div class="... js-global-error" data-global-error-msg-compact="testmsg2" data-global-error-msg-count="1">test msg 2</div>
</div>
```
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Gitea prefers to use relative URLs in code (to make multiple domain work
for some users)
So it needs to use `toAbsoluteUrl` to generate a full URL when click
"Reference in New Issues"
And add some comments in the test code
- When crafting the OAuth2 callbackURL take into account `appSubUrl`,
which is quite safe given that its strictly formatted.
- No integration testing as this is all done in Javascript.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1795
(cherry picked from commit 27cb6b7956)
Co-authored-by: Gusted <postmaster@gusted.xyz>
When the form is going to be submitted, add the "is-loading" class to
show an indicator and avoid user UI events.
When the request finishes (success / error), remove the "is-loading"
class to make user can interact the UI.
To improve maintainability, this PR:
1. Rename `web_src/js/modules/aria` to `web_src/js/modules/fomantic`
(the code there are all for aria of fomantic)
2. Move api/transition related code to
`web_src/js/modules/fomantic/api.js` and
`web_src/js/modules/fomantic/transition.js`
No logic is changed.
* Show checkout instructions also when there is no permission to push,
for anyone who wants to locally test the changes.
* First checkout the branch exactly as is, without immediately having to
solve merge conflicts. Leave this to the merge step, since it's often
convenient to test a change without worrying about this.
* Use `git fetch -u`, so an existing local branch is updated when
re-testing the same pull request. But not the more risky `git fetch -f`
in to handle force pushes, as we don't want to accidentally overwrite
important local changes.
* Show different merge command depending on the chosen merge style,
interactively updated.
When hitting the `enter` key to create a new project column, the request
is sent twice because the `submit` event and `key up` event are both
triggered.
Probably a better solution is to rewrite these parts of the code to
avoid using native jQuery but reuse the `form-fetch-action` class. But
it's beyond my ability.
1. Do not show temporary tooltips that are triggered from within
dropdowns. Previously this resulted in the tooltip being stuck to
top-left of the page like seen on issue comment URL copy. I could not
figure out any tippy options that prevent this, so I think it's better
to just not show it.
1. Refactor `initGlobalCopyToClipboardListener` so that it does not run
a often useless `document.querySelector` on every click, make
`data-clipboard-text-type` work with `data-clipboard-target`. No use in
current code base but still good to have. Finally some minor code
cleanup in the function.
Point 1 is for this copy button:
<img width="229" alt="image"
src="https://github.com/go-gitea/gitea/assets/115237/81f34746-8ea5-43d9-8c6f-f6f417a9e4ad">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
1. Dropzone attachment removal, pretty simple replacement
2. Image diff: The previous code fetched every image twice, once via
`img[src]` and once via `$.ajax`. Now it's only fetched once and a
second time only when necessary. The image diff code was partially
rewritten.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all JS and PY dependencies
- Enable eslint `prefer-object-has-own` and autofix issue
- Fix styling on citation buttons
- Tested citation, mermaid, monaco, swagger, katex
Citation button issue was that these buttons were not filled:
<img width="136" alt="Screenshot 2023-10-07 at 14 05 08"
src="https://github.com/go-gitea/gitea/assets/115237/435f0c91-28ac-46b3-bae4-dad768b29c05">
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
Fixes https://github.com/go-gitea/gitea/issues/27136.
This does the following for Monaco's EOL setting:
1. Use editorconfig setting if present
2. Use the file's dominant line ending as detected by monaco, which uses
LF for empty file
WIP because:
- [x] Some calls set a `content-type` but send no body, can likely
remove the header
- [x] Need to check whether `charset=utf-8` has any significance on the
webauthn calls, I assume not as it is the default for json content.
- [x] Maybe `no-restricted-globals` is better for eslint, but will
require a lot of duplication in the yaml or moving eslint config to a
`.js` extension.
- [x] Maybe export `request` as `fetch`, shadowing the global.
1. Introduce lightweight `fetch` wrapper functions that automatically
sets csfr token, content-type and use it in `RepoActionView.vue`.
2. Fix a specific issue on `RepoActionView.vue` where a fetch network
error is shortly visible during page reload sometimes. It can be
reproduced by F5-in in quick succession on the actions view page and was
also producing a red error box on the page.
Once approved, we can replace all current `fetch` uses in UI with this
in another PR.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Before:
* The layout is quite complex
* The UI flickers when switch the stats (https://try.gitea.io/)
After:
* Simplify the code
* The UI doesn't flicker
The [recommended order](https://vuejs.org/guide/scaling-up/sfc.html) for
SFC blocks is script -> template -> style, which we were violating
because template and script were swapped. I do find script first also
easier to read because the imports are on top, letting me immideatly see
a component's dependencies.
This is a pure cut-paste refactor with some removal of some empty lines.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
1. Use `gt-invisible` instead of `invisible`.
2. Use `gt-word-break` instead of `dont-break-out` (there is a slight
different "hyphens", but I think it won't affect too much since it is
only used for the "full name").
3. Remove `.small.button:has(svg)` , now our buttons could layout SVG
correctly, and actually I didn't see this CSS class is used in code.
Each change is tested manually line by line. There are too many changes
so I can't share dozens of screenshots.
In short:
1. `ui right` could be still used in `ui top attached header`, because
there is a special case.
2. A lot of `ui right` are just no-op, so they can be removed safely.
3. Some of the `ui right` should be replaced by `gt-float-right` (to
avoid breaking, leave them to the future).
4. A few of the `ui right` could be rewritten by flex.
Compare those `Uint8Array` via conversion to Array which are properly
comparable, so that we don't have to worry about whether `TextEncoder`
and `UInt8Array` from the environment are compatible or not.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix#26731
Almost all "tabindex" in code are incorrect.
1. All "input/button" by default are focusable, so no need to use "tabindex=0"
2. All "div/span" by default are not focusable, so no need to use "tabindex=-1"
3. All "dropdown" are focusable by framework, so no need to use "tabindex"
4. Some tabindex values are incorrect (eg: `new_form.tmpl`), so remove them
Co-authored-by: Giteabot <teabot@gitea.io>
Adds
[eslint-plugin-vue-scoped-css](https://github.com/future-architect/eslint-plugin-vue-scoped-css)
and fixes discovered issues which are:
- 1 unused selector
- 3 selectors with `.full.height` parent in a `<style scoped>` block so
the rule could not find the parent. Move these into the unscoped block
instead. They worked before and after.
Focus the editor when clicking the "Write" tab. Works for both Textarea
and EasyMDE. Does for some reason not work without the
`requestAnimationFrame`.
The "btn-octicon is-loading" was introduced by #21842 , it is only used
by the "Copy Content" button, but the "btn-octicon" selector would
affect too many uncertain elements.
Now there is a general "small-loading-icon" class, so the "btn-octicon
is-loading" could be removed.
1. Use `is-loading` instead of `ui loader`
2. Introduce class name `image-diff-tabs`, instead of searching `gt-hidden`, which is fragile
3. Align the UI elements, see the screenshots.
Now Gitea exposes unhandled promise rejection messages as error message on the UI.
The "comment form" was quite unclear before, so it should be handled more gracefully to avoid such error.
In GitHub, we can not rerun jobs if the workflow is disabled.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Removes all dropdown and dimmer animations. Works everywhere as far as I
can tell, but need to give this thorough testing. Removes around 70kb
JS/CSS.
Note, I'm not 100% sure regarding the various callbacks, those will need
more investigation, but it appears to work nonetheless.
Fixes: https://github.com/go-gitea/gitea/issues/15709
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Previously, the tooltip for this button was only shown after opening and
closing it once because it was only set after the server response, now
it shows before opening it.
This PR refactors a bunch of projects-related code, mostly the
templates.
The following things were done:
- rename boards to columns in frontend code
- use the new `ctx.Locale.Tr` method
- cleanup template, remove useless newlines, classes, comments
- merge org-/user and repo level project template together
- move "new column" button into project toolbar
- move issue card (shared by projects and pinned issues) to shared
template, remove useless duplicated styles
- add search function to projects (to make the layout more similar to
milestones list where it is inherited from 😆)
- maybe more changes I forgot I've done 😆Closes#24893
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Resizing the comment editor can be a very expensive operation because it
triggers page reflows, which on large PRs can take upwards of seconds to
complete. Disable this mechanism on the diff page only where we know
that the page can get large.
Fixes https://github.com/go-gitea/gitea/issues/26201 for the textarea
editor.
I don't think this can be fixed for EasyMDE because as far as I can
tell, it exposes no option to disable this resizing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Followup to https://github.com/go-gitea/gitea/pull/25935 which has
missed to change the icon on the repolist because the logic is not
shared with templates.
Co-authored-by: Giteabot <teabot@gitea.io>
Move `public/*` to `public/assets/*`
Some old PRs (like #15219) introduced inconsistent directory system.
For example: why the local directory "public" is accessed by
`http://site/assets`? How to serve the ".well-known" files properly in
the public directory?
For convention rules, the "public" directory is widely used for the
website's root directory. It shouldn't be an exception for Gitea.
So, this PR makes the things consistent:
* `http://site/assets/foo` means `{CustomPath}/public/assets/foo`.
* `{CustomPath}/public/.well-known` and `{CustomPath}/public/robots.txt`
can be used in the future.
This PR is also a prerequisite for a clear solution for:
* #21942
* #25892
* discourse.gitea.io: [.well-known path serving custom files behind
proxy?](https://discourse.gitea.io/t/well-known-path-serving-custom-files-behind-proxy/5445/1)
This PR is breaking for users who have custom "public" files (CSS/JS).
After getting approvals, I will update the documents.
----
## ⚠️ BREAKING ⚠️
If you have files in your "custom/public/" folder, please move them to
"custom/public/assets/".
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Previously, `sortablejs` was imported twice, once synchronously and once
asynchronously, leading to webpack creating duplicate output code (once
in the index bundle, and once in a separate chunk). Fix this by always
asynchronously importing it. This was one of the build warnings observed
when trying to build with vite.
Fix#25627
1. `ctx.Data["Link"]` should use relative URL but not AppURL
2. The `data-params` is incorrect because it doesn't contain "page". JS
can simply use "window.location.search" to construct the AJAX URL
3. The `data-xxx` and `id` in notification_subscriptions.tmpl were
copied&pasted, they don't have affect.
Monaco can not deal with color formats other than 6-digit hex, so we
convert the colors for it via new
[`tinycolor2`](https://github.com/bgrins/TinyColor) dependency (5kB
minzipped).
Also, with the addition of the module, we can replace the existing
`hexToRGBColor` usage, I verified it is compatible with the current
tests before removing the function.
Fixes: https://github.com/go-gitea/gitea/issues/25770
Replace #25446, fix#25438
All "cancel" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
This is a complete fix for all modal dialogs.
The major change is "modules/aria/modal.js", "devtest" related code is
for demo/test purpose.
Close#24593
Some behavior:
- If log step line in hash exists, expand the step and scroll to the log
line.
- If step exists but line not exists, the step will be expanded.
- If step not exists, stays on the job's page.
Some Notes:
- Changed mounted to async because need to await for first `loadJob` so
`currentJobStepsStates` can be initialized and used in
`hashChangeListener `.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#20976Close#20975
1. Fix the bug: the TOC in footer was incorrectly rendered as main
content's TOC
2. Fix the layout: on mobile, the TOC is put above the main content,
while the sidebar is put below the main content
3. Auto collapse the TOC on mobile
ps: many styles of "wiki.css" are moved from old css files, so leave
nits to following PRs.
Fix #25438
All non-"ok" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Set
[type=search](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/input/search)
- Disable spellcheck
- Set maxLength 255 that I found in `templates/repo/issue/search.tmpl`
- Remove unnecessary `max-width`, it does nothing
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
A regression of #25210
The `e.target` is not "this", eg: `<button link-action><svg></button>`,
then `this` should be `button` but `e.target` is `svg`.
I will propose a clearer and complete solution for these "link-action"
"show-modal" elements after #24724
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all JS dependencies
- Enable stylint
[`media-feature-name-value-no-unknown`](https://stylelint.io/user-guide/rules/media-feature-name-value-no-unknown)
- Make use of new features in webpack and text-expander-element
- Tested Swagger and Mermaid
To explain the `text-expander-element` change: Before this version, the
element added a unavoidable space after emoji completion. Now that
https://github.com/github/text-expander-element/pull/36 is in, we gain
control over this space and I opted to remove it for emoji completion
and retain it for `@` mentions.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
The current UI to create API access tokens uses checkboxes that have a
complicated relationship where some need to be checked and/or disabled
in certain states. It also requires that a user interact with it to
understand what their options really are.
This branch changes to use `<select>`s. It better fits the available
options, and it's closer to [GitHub's
UI](https://github.com/settings/personal-access-tokens/new), which is
good, in my opinion. It's more mobile friendly since the tap-areas are
larger. If we ever add more permissions, like Maintainer, there's a
natural place that doesn't take up more screen real-estate.
This branch also fixes a few minor issues:
- Hide the error about selecting at least one permission after second
submission
- Fix help description to call it "authorization" since that's what
permissions are about (not authentication)
Related: #24767.
<img width="883" alt="Screenshot 2023-06-07 at 5 07 34 PM"
src="https://github.com/go-gitea/gitea/assets/10803/6b63d807-c9be-4a4b-8e53-ecab6cbb8f76">
---
When it's open:
<img width="881" alt="Screenshot 2023-06-07 at 5 07 59 PM"
src="https://github.com/go-gitea/gitea/assets/10803/2432c6d0-39c2-4ca4-820e-c878ffdbfb69">
Fixes#25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
According to my test, the UI (emoji) is fine in Safari
And actually the code is just dead code, because the "resize" event is
never fired on page loading. So for most cases users just view the pages
without this hacky patch, nobody ever complains.
Fixes https://github.com/go-gitea/gitea/issues/25130
The old code uses `$(this).next()` to get `dismiss-review-modal`.
At first, it will get `$(#dismiss-review-modal)`, but the next time it
will get `$(#dismiss-review-modal).next();`
and then `$(#dismiss-review-modal).next().next();`.
Because div `dismiss-review-modal` will be removed when
`dismiss-review-btn` clicked.
Maybe the right usage is adding `show-modal` class and `data-modal`
attribute.
Follow:
* #22697
There are some bugs in #22697:
* https://github.com/go-gitea/gitea/pull/22697#issuecomment-1577957966
* the webauthn failure message is never shown and causes console error
* The `document.getElementById('register-button')` and
`document.getElementById('login-button')` is wrong
* there is no such element in code
* it causes JS error when a browser doesn't provide webauthn
* the end user can't see the real error message
These bugs are fixed in this PR.
Other changes:
* Use simple HTML/CSS layouts, no need to use too many `gt-` patches
* Make the webauthn page have correct "page-content" layout
* The "data-webauthn-error-msg" elements are only used to provide locale
texts, so move them into a single "gt-hidden", then no need to repeat a
lot of "gt-hidden" in code
* The `{{.CsrfTokenHtml}}` is a no-op because there is no form
* Many `hideElem('#webauthn-error')` in code is no-op because the
`webauthn-error` already has "gt-hidden" by default
* Make the tests for "URLEncodedBase64" really test with concrete cases.
Screenshots:
* Error message when webauthn fails (before, there is no error message):
<details>
</details>
* Error message when webauthn is unavailable
<details>
</details>
There were several issues with the WebAuthn registration and testing
code and the style
was very old javascript with jquery callbacks.
This PR uses async and fetch to replace the JQuery code.
Ref #22651
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: silverwind <me@silverwind.io>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Feel free to close this if there isn't interest.
The tree view looks amazing, and all of our users are really enjoying it
(major kudos to developers!), but only IF I tell them it exists!
Essentially, the file tree view as it is effectively undiscoverable.
This PR changes the default state for the tree view to open, which
should significantly help with discoverability.
An alternative could be to reserve more horizontal space, as a typical
accordion panel would look (eg. VS Code), eg.
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
silverwind
