Split up `repo.Action` in `routers/web` into smaller functions.
While some of the functionality was very similar (starring / watching),
they are ultimately separate actions. Rather than collecting all of them
under a single handler (`repo.Action`), split them up into smaller,
independent functions.
This does result in a little bit of code duplication, but the
independent functions should be easier to follow and understand.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "desc" action has not been used since at least 2016, probably much
earlier. It's an ancient Gogs artifact - drop it.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves#2455
As suggested by @Gusted in #2431, move the permission checking from
`ArtifactsDeleteView` into the route instead, where it belongs.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves#2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes#2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
- Remove unnecessary checks for `ctx.Repo.TreePath`, because it will
already early-return if it's empty.
- Simplify `performBlame` to extract the repoPath from the context.
- Don't render the topics, as they are not shown in the blame
page (there's a condition in the template for the blame page).
- Fix that `performBlame` doesn't call `NotFound`, it should instead
only return the error.
- Fix that the error handlings call `ServerError` instead of `NotFound`.
- Simplify `bypass-blame-ignore` to use `ctx.FormBool`.
- Remove `TreeLink`, `HasParentPath` and `ParentPath` as it's not used
in the blame template.
- Inline `BranchLink` and `RawFileLink` string operations.
- Move around `NumLines` to make it clear the error is handled.
- Less code, less things the code does, more readable and thus more
maintanable!
(cherry picked from commit e02baca55c)
(cherry picked from commit 74e00620ca)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4)
(cherry picked from commit 2d3c81d4f2)
(cherry picked from commit 624a61b3b8)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d)
(cherry picked from commit 70c5e2021d)
(cherry picked from commit 48b25be67a)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc6)
(cherry picked from commit 30d168bcc8)
(cherry picked from commit 19be82b7ef)
(cherry picked from commit 334b703b17)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes#126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212)
(cherry picked from commit 20d14f7844)
(cherry picked from commit 4359741431)
(cherry picked from commit 35cff45eb8)
(cherry picked from commit 2fc0d0b8a3)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes#1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e5460)
(cherry picked from commit 1868dec2e4)
(cherry picked from commit c3a8e98870)
(cherry picked from commit 9266b1916f)
(cherry picked from commit 8fa5ff65af)
- The endpoint was moved from being an API endpoint to an web endpoint
with JSON result. However the API context isn't the same as the web
context, for example the `ctx.Error` only takes in the first two
arguments into consideration and doesn't do logging, which is not the
same behavior as the API context where there's three arguments and does
do logging and only reveal the function + error if the user is admin.
- Remove any details in the error message and do the logging seperatly,
this is somewhat consistent with how other API endpoints behave.
- Ref: https://codeberg.org/forgejo/forgejo/issues/1998
(cherry picked from commit fe71e32ace)
(cherry picked from commit c89e0735fa)
(cherry picked from commit 4c04dcfc59)
(cherry picked from commit 66eae1041c)
(cherry picked from commit 7b70fa9392)
(cherry picked from commit abf64ca0e3)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
FixesCodeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b74439922)
(cherry picked from commit 337cf62c10)
(cherry picked from commit b6786fdb32)
(cherry picked from commit a5d2829a10)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72e)
(cherry picked from commit 42c55e494e)
(cherry picked from commit e3463bda47)
Earl Warren