## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Before, Gitea shows the database table stats on the `admin dashboard`
page.
It has some problems:
* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.
So, this PR uses a separate page to show the stats and removes the
`actions` stat.
## ⚠️ BREAKING
The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
close https://github.com/go-gitea/gitea/issues/16321
Provided a webhook trigger for requesting someone to review the Pull
Request.
Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.
After the Pull Request is merged, I will supplement the relevant
documentation.
Very small UX change, "confusable" is a word that is indeed valid, but
when you look it up online, it doesn't take long for this adjective to
appear in [its technical Unicode-related
context](https://util.unicode.org/UnicodeJsps/confusables.jsp). I think
that it throws me off as a person that doesn't speak English natively.
I think that this could be replaced with "can be confused with". As the
change is very small and purely a matter of preference, if you (the
maintainer) believe that this shouldn't be included, feel free to close
this without any further discussion, as your time would probably be
better used elsewhere.
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
This PR is to allow users to specify status checks by patterns. Users
can enter patterns in the "Status Check Pattern" `textarea` to match
status checks and each line specifies a pattern. If "Status Check" is
enabled, patterns cannot be empty and user must enter at least one
pattern.
Users will no longer be able to choose status checks from the table. But
a __*`Matched`*__ mark will be added to the matched checks to help users
enter patterns.
Benefits:
- Even if no status checks have been completed, users can specify
necessary status checks in advance.
- More flexible. Users can specify a series of status checks by one
pattern.
Before:
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Although some features are mixed together in this PR, this PR is not
that large, and these features are all related.
Actually there are more than 70 lines are for a toy "test queue", so
this PR is quite simple.
Major features:
1. Allow site admin to clear a queue (remove all items in a queue)
* Because there is no transaction, the "unique queue" could be corrupted
in rare cases, that's unfixable.
* eg: the item is in the "set" but not in the "list", so the item would
never be able to be pushed into the queue.
* Now site admin could simply clear the queue, then everything becomes
correct, the lost items could be re-pushed into queue by future
operations.
3. Split the "admin/monitor" to separate pages
4. Allow to download diagnosis report
* In history, there were many users reporting that Gitea queue gets
stuck, or Gitea's CPU is 100%
* With diagnosis report, maintainers could know what happens clearly
The diagnosis report sample:
[gitea-diagnosis-20230510-192913.zip](https://github.com/go-gitea/gitea/files/11441346/gitea-diagnosis-20230510-192913.zip)
, use "go tool pprof profile.dat" to view the report.
Screenshots:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Implements displaying a README.md file present in a users ```.profile```
repository on the users profile page. If no such repository/file is
present, the user's profile page remains unchanged.
Example of user with ```.profile/README.md```
Example of user without ```.profile/README.md```
This pull request closes the feature request in #12233
Special thanks to @techknowlogick for the help in the Gitea discord!
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: Yarden Shoham <git@yardenshoham.com>
- Very similar to #24550
The correct thing to do is to translate the entire phrase into a single
string. The previous translation assumed all languages have a space
between the "added on" and the date (and that "added on" comes before
the date).
Some languages, like Hebrew, have no space between the "added on" and
the date. For example:
```ini
added_on=נוסף ב-%s
```
("added" becomes נוסף, "on" is ב and when paired with a date we use a
dash to connect ב with the date)
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: delvh <dev.lh@web.de>
- Similar to #24550
- Similar to #24562
The correct thing to do is to translate the entire phrase into a single
string. The previous translation assumed all languages have a space
between the "valid until" and the date (and that "valid until" comes
before the date).
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
The correct thing to do is to translate the entire phrase into a single
string. The previous translation assumed all languages have a space
between the "joined on" and the date (and that "joined on" comes before
the date).
Some languages, like Hebrew, have no space between the "joined on" and
the date. For example:
```ini
joined_on=נרשם ב-%s
```
("joined" becomes נרשם, "on" is ב and when paired with a date we use a
dash to connect ב with the date)
Don't remember why the previous decision that `Code` and `Release` are
non-disable units globally. Since now every unit include `Code` could be
disabled, maybe we should have a new rule that the repo should have at
least one unit. So any unit could be disabled.
Fixes#20960Fixes#7525
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: yp05327 <576951401@qq.com>
## Changes
- Fixes the case where a logged in user can accept an email invitation
even if their email address does not match the address in the invitation
Co-Author: @wxiaoguang
It is more convenient that user just need to enter a new branch name after he selects the branch which he want to rename.
So this PR move the function of renaming branch to the page of branches list.
This PR also restyle the button of `new branch`, `download`, `delete`....
https://user-images.githubusercontent.com/33891828/235277997-413060bb-759f-430a-b5c4-df5e40ffcd28.mov
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Close#7570
1. Clearly define the wiki path behaviors, see
`services/wiki/wiki_path.go` and tests
2. Keep compatibility with old contents
3. Allow to use dashes in titles, eg: "2000-01-02 Meeting record"
4. Add a "Pages" link in the dropdown, otherwise users can't go to the
Pages page easily.
5. Add a "View original git file" link in the Pages list, even if some
file names are broken, users still have a chance to edit or remove it,
without cloning the wiki repo to local.
6. Fix 500 error when the name contains prefix spaces.
This PR also introduces the ability to support sub-directories, but it
can't be done at the moment due to there are a lot of legacy wiki data,
which use "%2F" in file names.
Co-authored-by: Giteabot <teabot@gitea.io>
Followup of #23876 according to my unreleased review demanding tooltips.
Additionally
- add a `muted` equivalent for buttons
- convert `switch to legacy` to an actual button
- enroll `switch to legacy` in the builtin pseudo focus cycle
- remove spaces between the buttons
The effect of the `muted` class is what you would expect: The button
loses all of its normal styling, and is defined only by its content instead.
This will help reduce a11y infractions in the future, as that was one of
the major points why people didn't use `<button>` tags and decided on a
bad fix (i.e. through `<div>`s) instead.
## Appearance
---------
Co-authored-by: silverwind <me@silverwind.io>
- Add placeholders and aria-label all input fields on these two pages
- Add margin before wiki change message
- Remove labels from release page, replacing them with aria-label
I've heard many reports of users getting scared when they see their own
email address for their own profile, as they believe that the email
field is also visible to other users. Currently, using Incognito mode
or going over the Settings is the only "reasonable" way to verify this
from the perspective of the user.
A locked padlock should be enough to indicate that the email is not
visible to anyone apart from the user and the admins. An unlocked
padlock is used if the email address is only shown to authenticated
users.
Some additional string-related changes in the Settings were introduced
as well to ensure consistency, and the comments in the relevant tests
were improved so as to allow for easier modifications in the future.
---
#### Screenshot (EDIT: Scroll down for more up-to-date screenshots)
***Please remove this section before merging.***
This lock should only appear if the email address is explicitly hidden
using the `Hide Email Address` setting. The change was originally tested
on top of and designed for the Forgejo fork, but I don't expect any
problems to arise from this and I don't think that a
documentation-related change is strictly necessary.
---------
Co-authored-by: silverwind <me@silverwind.io>
Right now the authors search dropdown might take a long time to load if
amount of authors is huge.
Example: (In the video below, there are about 10000 authors, and it
takes about 10 seconds to open the author dropdown)
https://user-images.githubusercontent.com/17645053/229422229-98aa9656-3439-4f8c-9f4e-83bd8e2a2557.mov
Possible improvements can be made, which will take 2 steps (Thanks to
@wolfogre for advice):
Step 1：
Backend: Add a new api, which returns a limit of 30 posters with matched
prefix.
Frontend: Change the search behavior from frontend search(fomantic
search) to backend search(when input is changed, send a request to get
authors matching the current search prefix)
Step 2：
Backend: Optimize the api in step 1 using indexer to support fuzzy
search.
This PR is implements the first step. The main changes:
1. Added api: `GET /{type:issues|pulls}/posters` , which return a limit
of 30 users with matched prefix (prefix sent as query). If
`DEFAULT_SHOW_FULL_NAME` in `custom/conf/app.ini` is set to true, will
also include fullnames fuzzy search.
2. Added a tooltip saying "Shows a maximum of 30 users" to the author
search dropdown
3. Change the search behavior from frontend search to backend search
After:
https://user-images.githubusercontent.com/17645053/229430960-f88fafd8-fd5d-4f84-9df2-2677539d5d08.mov
Fixes: https://github.com/go-gitea/gitea/issues/22586
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
I neglected that the `NameKey` of `Unit` is not only for translation,
but also configuration. So it should be `repo.actions` to maintain
consistency.
## ⚠️ BREAKING ⚠️
If users already use `actions.actions` in `DISABLED_REPO_UNITS` or
`DEFAULT_REPO_UNITS`, it will be treated as an invalid unit key.
Follow #23633 and #23240Close#23814
Now we almost have a complete test set for Gitea's LocalStore.
This PR is still a quick fix for the legacy locale system (see the
TODOs), to resolve the problems fundamentally, it needs more work in the
future.
Closes#20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393Closes#22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Close#20553
There were already a lot of functions powered by JavaScript in Gitea.
Without JavaScript, the Gitea Web UI almost doesn't work (only some
static links work ....)
It use old en-US locales as reference, fill the old other locales with
new locales.
----
## More broken translations
Many translations are still broken. The reason is: at the last time
restoring the ini to crowdin, many semicolon are treated as comments.
Two kinds of broken strings:
### Some translations can be re-translated
<details>
```
skipping options/locale/locale_si-LK.ini org teams.add_nonexistent_repo
skipping options/locale/locale_tr-TR.ini repo commits.search.tooltip
skipping options/locale/locale_es-ES.ini repo settings.trust_model.committer.desc
skipping options/locale/locale_es-ES.ini admin dashboard.new_version_hint
skipping options/locale/locale_pt-PT.ini org teams.add_nonexistent_repo
skipping options/locale/locale_hu-HU.ini install require_sign_in_view_popup
skipping options/locale/locale_hu-HU.ini repo migrate.invalid_local_path
skipping options/locale/locale_id-ID.ini repo migrate.invalid_local_path
skipping options/locale/locale_id-ID.ini org teams.add_nonexistent_repo
skipping options/locale/locale_de-DE.ini repo settings.protect_protected_file_patterns_desc
```
</details>
So this PR also does some small changes on them, to trigger the
re-translation.
### The `locale_el-GR.ini` contains many broken tranlsations
I guess we should reset them from crowdin side, then translators can
re-translate them.
----
Update: in latest main, the strings have been fixed.
## TODO
Update: the el-GR translators have done great job and fixes these broken
translations.
<details>
Merge this PR ASAP and upload `locale_el-GR.ini` to crowdin to remove
broken strings.
Out-dated, fixed in main.
</details>
---------
Co-authored-by: delvh <dev.lh@web.de>
This PR follows #22599 and #23450
The major improvements:
1. The `aria-*.js` are totally transparent now, no need to call
`attachDropdownAria` explicitly anymore.
* It hooks the `$.fn.checkbox` and `$.fn.dropdown`, then our patch
works.
* It makes all dynamically generated checkbox/dropdown work with a11y
without any change
* eg: the `conversation.find('.dropdown').dropdown();` in `repo-diff.js`
2. Since it's totally transparent now, it could be easier to modify or
remove in the future.
3. It handles all selection labels as well (by onLabelCreate), so it
supports "multiple selection dropdown" now.
* It partially completes one of my TODOs: `TODO: multiple selection is
not supported yet.`
4. The code structure is clearer, code blocks are splitted into
different functions.
* The old `attachOneDropdownAria` was splitted into separate functions.
* It makes it easier to add more fine tunes in the future, and co-work
with contributors.
6. The code logic is similar as before, only two new parts:
1. the `ariaCheckboxFn` and `ariaDropdownFn` functions
2. the `onLabelCreate` and `updateSelectionLabel` functions
In `aria-dropdown.js` I had to mix jQuery and Vanilla JS somewhat, I
think the code is still understandable, otherwise the code would be much
more complex to read.
Thanks to fsologureng for the idea about "improving the 'delete icon'
with aria attributes".
If there is anything unclear or incorrect, feel free to ask and discuss,
or propose new PRs for it.
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.
Implements #14865
---------
Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When there is an error creating a new openIDConnect authentication
source try to handle the error a little better.
Close#23283
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
## TLDR
* Fix the broken page / broken image problem when click "Install"
* Close#20089
* Fix the Password Hash Algorithm display problem for #22942
* Close#23183
* Close#23184
## Details
### The broken page / broken image problem when click "Install"
(Redirect failed after install gitea #23184)
Before: when click "install", all new requests will fail, because the
server has been restarted. Users just see a broken page with broken
images, sometimes the server is not ready but the user would have been
redirect to "/user/login" page, then the users see a new broken page
(connection refused or something wrong ...)
After: only check InstallLock=true for necessary handlers, and sleep for
a while before restarting the server, then the browser has enough time
to load the "post-install" page. And there is a script to check whether
"/user/login" is ready, the user will only be redirected to the login
page when the server is ready.
### During new instance setup make 'Gitea Base URL' filled from
window.location.origin #20089
If the "app_url" input contains `localhost` (the default value from
config), use current window's location href as the `app_url` (aka
ROOT_URL)
### Fix the Password Hash Algorithm display problem for "Provide the
ability to set password hash algorithm parameters #22942"
Before: the UI shows `pbkdf2$50000$50`
<details>
</details>
After: the UI shows `pbkdf2`
<details>
</details>
### GET data: net::ERR_INVALID_URL #23183
Cause by empty `data:` in `<link rel="manifest"
href="data:{{.ManifestData}}">`
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The locales of Gitea has been broken for long time, till now, it's still
not fully fixed.
One of the root problems is that the `ini` library is quite quirky and
the `update-locales` script doesn't work well for all cases.
This PR fixes the `update-locales` script to make it satisfy `ini`
library and the crowdin.
See the comments for more details.
The `locale_zh-CN.ini` is an example, it comes from crowdin and is
processed by the new `update-locales.sh`. Especially see the `feed_of`:
https://github.com/go-gitea/gitea/pull/23240/files#diff-321f6ca4eae1096eba230e93c4740f9903708afe8d79cf2e57f4299786c4528bR268
Extract from #11669 and enhancement to #22585 to support exclusive
scoped labels in label templates
* Move label template functionality to label module
* Fix handling of color codes
* Add Advanced label template
This includes pull requests that you approved, requested changes or
commented on. Currently such pull requests are not visible in any of the
filters on /pulls, while they may need further action like merging, or
prodding the author or reviewers.
Especially when working with a large team on a repository it's helpful
to get a full overview of pull requests that may need your attention,
without having to sift through the complete list.
The API to create tokens is missing the ability to set the required
scopes for tokens, and to show them on the API and on the UI.
This PR adds this functionality.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
The "Reference in new issue" option shows up in a menu when looking at
pull requests. All the other options there follow the "Title case":
* Copy Link
* Quote Reply
* Edit
This patch makes sure this option also follow the Title case.
Screenshot of how it looks without this patch:
Co-authored-by: Dalai Felinto <dalai@blender.org>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Add setting to allow edits by maintainers by default, to avoid having to
often ask contributors to enable this.
This also reorganizes the pull request settings UI to improve clarity.
It was unclear which checkbox options were there to control available
merge styles and which merge styles they correspond to.
Now there is a "Merge Styles" label followed by the merge style options
with the same name as in other menus. The remaining checkboxes were
moved to the bottom, ordered rougly by typical order of operations.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Original Issue: https://github.com/go-gitea/gitea/issues/22102
This addition would be a big benefit for design and art teams using the
issue tracking.
The preview will be the latest "image type" attachments on an issue-
simple, and allows for automatic updates of the cover image as issue
progress is made!
This would make Gitea competitive with Trello... wouldn't it be amazing
to say goodbye to Atlassian products? Ha.
First image is the most recent, the SQL will fetch up to 5 latest images
(URL string).
All images supported by browsers plus upcoming formats: *.avif *.bmp
*.gif *.jpg *.jpeg *.jxl *.png *.svg *.webp
The CSS will try to center-align images until it cannot, then it will
left align with overflow hidden. Single images get to be slightly
larger!
Tested so far on: Chrome, Firefox, Android Chrome, Android Firefox.
Current revision with light and dark themes:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#19555
Test-Instructions:
https://github.com/go-gitea/gitea/pull/21441#issuecomment-1419438000
This PR implements the mapping of user groups provided by OIDC providers
to orgs teams in Gitea. The main part is a refactoring of the existing
LDAP code to make it usable from different providers.
Refactorings:
- Moved the router auth code from module to service because of import
cycles
- Changed some model methods to take a `Context` parameter
- Moved the mapping code from LDAP to a common location
I've tested it with Keycloak but other providers should work too. The
JSON mapping format is the same as for LDAP.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR fixes two problems. One is when filter repository issues, only
repository level projects are listed. Another is if you list open
issues, only open projects will be displayed in filter options and if
you list closed issues, only closed projects will be displayed in filter
options.
In this PR, both repository level and org/user level projects will be
displayed in filter, and both open and closed projects will be listed as
filter items.
---------
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
The error reported when a user passes a private ssh key as their ssh
public key is not very nice.
This PR improves this slightly.
Ref #22693
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22183
Replaces #22187
This PR adds secrets for users. I refactored the files for organizations
and repos to use the same logic and templates. I splitted the secrets
from deploy keys again and reverted the fix from #22187.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
EDIT: The main change of this PR was resolved by #22599. This
complements that PR for some cases without label and complicated layout
to be added.
NOTE: Contributed by @Forgejo.
Currently only a single project like milestone, not multiple like
labels.
Implements #14298
Code by @brechtvl
---------
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Added ARIA navigation landmark to navigation bar and aria label for both
nav bar and footer.
Contributed by @forgejo.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
On activating local accounts, the error message didn't differentiate
between using a wrong or expired token, or a wrong password. The result
could already be obtained from the behaviour (different screens were
presented), but the error message was misleading and lead to confusion
for new users on Codeberg with Forgejo.
Now, entering a wrong password for a valid token prints a different
error message.
The problem was introduced in 0f14f69e60.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds the support for scopes of access tokens, mimicking the
design of GitHub OAuth scopes.
The changes of the core logic are in `models/auth` that `AccessToken`
struct will have a `Scope` field. The normalized (no duplication of
scope), comma-separated scope string will be stored in `access_token`
table in the database.
In `services/auth`, the scope will be stored in context, which will be
used by `reqToken` middleware in API calls. Only OAuth2 tokens will have
granular token scopes, while others like BasicAuth will default to scope
`all`.
A large amount of work happens in `routers/api/v1/api.go` and the
corresponding `tests/integration` tests, that is adding necessary scopes
to each of the API calls as they fit.
- [x] Add `Scope` field to `AccessToken`
- [x] Add access control to all API endpoints
- [x] Update frontend & backend for when creating tokens
- [x] Add a database migration for `scope` column (enable 'all' access
to past tokens)
I'm aiming to complete it before Gitea 1.19 release.
Fixes#4300
GiteaBot
