* Migrating reactions is just not that important
A failure during migrating reactions should not cause failure of
migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking issue reactions check the correct permission
Signed-off-by: Andrew Thornton <art27@cantab.net>
* And there is another one ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Migrating reactions is just not that important
A failure during migrating reactions should not cause failure of
migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking issue reactions check the correct permission
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* [Enhancement] Allow admin to merge pr with protected file changes
As tilte, show protected message in diff page and merge box.
Signed-off-by: a1012112796 <1012112796@qq.com>
* remove unused ver
* Update options/locale/locale_en-US.ini
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
* Add TrN
* Apply suggestions from code review
* fix lint
* Update options/locale/locale_en-US.ini
Co-authored-by: zeripath <art27@cantab.net>
* Apply suggestions from code review
* move pr proteced files check to TestPatch
* Call TestPatch when protected branches settings changed
* Apply review suggestion @CirnoT
* move to service @lunny
* slightly restructure routers/private/hook.go
Adds a lot of comments and simplifies the logic
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* skip duplicate protected files check
* fix check logic
* slight refactor of TestPatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking for protected files changes in TestPatch use the temporary repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix introduced issue with hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the check on PR index being greater than 0 as it unnecessary
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
If team does not exist expect ErrTeamNotExist not ErrUserNotEXist
Fix#11336
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Instead of a generic HTTP 500 error page, a flash message is rendered with the deploy key page template to inform the user that a key with the intended title already exists.
Fixes#13110
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Improved total count of issue when filtered.
* Fixed size of slice when selected 1 repository.
* Improved function of error check.
* improved comment
* Added parameter of return header.
Co-authored-by: 6543 <6543@obermui.de>
* Updated corresponded to the current vendored of "xorm.io/xorm".
* Dedublicated it by store the Options Struct into a variable.
* format code
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Removed total value.
* make fmt
* Improved value of sql.
Co-authored-by: zeripath <art27@cantab.net>
* Improved value of sql.
* improved message
* improved message
* improved message
* fixed message
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* move GitCommit to APIFormat convertion into convert package
* rename Commit convert functions
* move stopwatch to api convertion into convert package & rm unused code & extend test
* fix compare time
* Gitea not Gogs ;)
* Fix test
* Add no queue for test only
* improve code
* Auto watch whatever branch operation
* Fix lint
* Rename noqueue to immediate
* Remove old PushUpdate function
* Fix tests
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
* Add cron running API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* placate-swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* return not found
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
#12496 demonstrated that the API merge needs to return some information as
to why a merge has been disallowed with a status code 422.
This PR ensures that a reason is always returned.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
* Fix bug preventing transfer to private organization
The code assessing whether a private organization was visible to a user before
allowing transfer was incorrect due to testing membership the wrong way round
This PR fixes this issue and renames the function performing the test to be
clearer.
Further looking at the API for transfer repository - no testing was
performed to ensure that the acting user could actually see the new
owning organization.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* change IsUserPartOfOrg everywhere
* Extend notifications API and return pinned notifications in notifications list
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove spurious debugs
* as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/notification.go
* as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Repo listings are paginated in the API now. Unfortunately, they are
ORDER BY updated_unix which only has second resolution. This means that
if you do a listing when multiple projects were created at the same time
you can unstable ordering. If that unstable ordering happens at a page
boundary you may fail to get a complete repo listing.
To make things worse sorting by updated_unix means that we may never get
a complete listing because udpated_unix can change independent of our
API calls.
Fix this by making the API repo listing order by id instead.
* move Setting function into its own package
* swagger add&use new section "settings"
* move api AllowedReactions into general UI-Settings endpoint
* prepare TEST
* lint
* Add count to `GetUserRepositories` so that pagination can be supported for `/user/{username}/repos`
* Rework ListMyRepos to use models.SearchRepository
ListMyRepos was an odd one. It first fetched all user repositories and then tried to supplement them with accessible map. The end result was that:
* Limit for pagination did not work because accessible repos would always be appended
* The amount of pages was incorrect if one were to calculate it
* When paginating, all accessible repos would be shown on every page
Hopefully it should now work properly. Fixes#11800 and does not require any change on Drone-side as it can properly interpret and act on Link header which we now set.
Co-authored-by: Lauris BH <lauris@nix.lv>
* API allow to create closed milestones
* set CloseDate too
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Honor DEFAULT_PAGING_NUM for API
* set pagination to 10 for tests
* lint
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Provide diff and patch API endpoints
The diff and patch endpoints on the main routes are not accessible by token
therefore we provide new API based endpoints for these
Fix#10923
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the response an actual string
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* API: return an error when Mirrors globaly disabled
* keep it consistent with UI
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Allow site admin to disable mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* No need to run through Safe
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Clarify only disabling NEW mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Apply suggestions from @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* [FEATURE] [API] Add Endpoint for Branch Creation
Issue: https://github.com/go-gitea/gitea/issues/11376
This commit introduces an API endpoint for branch creation.
The added route is POST /repos/{owner}/{repo}/branches.
A JSON with the name of the new branch and the name of the old branch is
required as parameters.
Signed-off-by: Terence Le Huu Phuong <terence@qwasar.io>
* Put all the logic into CreateBranch and removed CreateRepoBranch
* - Added the error ErrBranchDoesNotExist in error.go
- Made the CreateNewBranch function return an errBranchDoesNotExist error
when the OldBranch does not exist
- Made the CreateBranch API function checks that the repository is not
empty and that branch exists.
* - Added a resetFixtures helper function in integration_test.go to
fine-tune test env resetting
- Added api test for CreateBranch
- Used resetFixture instead of the more general prepareTestEnv in the
repo_branch_test CreateBranch tests
* Moved the resetFixtures call inside the loop for APICreateBranch function
* Put the prepareTestEnv back in repo_branch_test
* fix import order/sort api branch test
Co-authored-by: zeripath <art27@cantab.net>
GH has different HardBreaks behaviour for markdown comments and documents.
Comments have hard breaks and documents have soft breaks - therefore Gitea's rendering will always be different from GH's if we only provide one setting.
Here we split the setting in to two - one for documents and one for comments and other things.
Signed-off-by: Andrew Thornton art27@cantab.net
Changes to index.js as per @silverwind
Co-authored-by: silverwind <me@silverwind.io>
Changes to docs as per @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix repo-list private and total count bugs
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure limited and private org public repos are displayed on "private"
Signed-off-by: Andrew Thornton <art27@cantab.net>
* switch from onlyPrivate to is_private
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Generate swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Make API EditIssue and EditPullRequest issue notifications
Restructure models.UpdateIssueByAPI and EditIssue/EditPullRequest
to issue notifications
Fix#10014
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update status!
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add archived options to SearchRepository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add only-private search
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add filter options and paging to dashboard repository page
Signed-off-by: Andrew Thornton <art27@cantab.net>
* swagger generate
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix-swagger-again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @mrsdizzie also remember state
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Correctly set the organization num repos
Correctly set the organization num repos to the number of
accessible repos for the user
Fix#11194
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* attempt to fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/user.go
* Explicit columns
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add test and fix 0 counted orgs
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove orgname from api
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow Git ref for /repos/{owner}/{repo}/git/commits/{sha}
* Consolidate API for getting single commit
* Fix tests and do it differently
Co-authored-by: zeripath <art27@cantab.net>
If user create pull review through api but not set CommitID,
I think it's necessary to use last headCommitID as default seting,
or this review will be considered as stale review which is wrong
Signed-off-by: a1012112796 <1012112796@qq.com>
* use same process as in routers/repo/branch.go/deleteBranch
* make sure default branch can not be deleted
* remove IsDefaultBranch from UI process - it is worth its own pull
* permissions
* make sure duplicate token names cannot be used
* add check to api routes too
* add @lunny s suggestion
* fix & don't forget User.ID
* AccessTokenByNameExists() return error too
* unique token for each test
* fix lint
Signed-off-by: 6543 <6543@obermui.de>
Co-authored-by: Lanre Adelowo <yo@lanre.wtf>
Add api methods for getting and updating user oauth2 applications.
Signed-off-by: Dan Molik <dan@danmolik.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* [suggest] change merge strategy： do not check write access if user in merge white list #10935
(cherry picked from commit ba74fc6389dfcad03c273441a49b54e4d38c86ee)
* fix NPE
* Fix cross compile (#10952)
* Fix cross compile
* Add test for cross compile
* Fix drone
* Fix drone
* Also prevent CC environment not to generate
Co-authored-by: zeripath <art27@cantab.net>
* fix merge box icon color bug (#10974)
that because need some space beturn ``text`` and color defines
Signed-off-by: a1012112796 <1012112796@qq.com>
* [skip ci] Updated translations via Crowdin
* Allow X in addition to x in tasks (#10979)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove api: merge reqRepoWriter
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes#7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Handle push rejections and push out-of-date in branch creation and
file upload.
* Remove the duplicated sanitize from services/pull/merge
* Move the errors Err(Merge)PushOutOfDate and ErrPushRejected to
modules/git
* Handle errors better in the upload file dialogs
Fix#10460
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
zeripath