The use of `--follow` makes getting these commits very slow on large repositories
as it results in searching the whole commit tree for a blob.
Now as nice as the results of `--follow` are, I am uncertain whether it is really
of sufficient importance to keep around.
Fix#20764
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR rewrites the invisible unicode detection algorithm to more
closely match that of the Monaco editor on the system. It provides a
technique for detecting ambiguous characters and relaxes the detection
of combining marks.
Control characters are in addition detected as invisible in this
implementation whereas they are not on monaco but this is related to
font issues.
Close#19913
Signed-off-by: Andrew Thornton <art27@cantab.net>
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Support localized README
* Slightly simplify getting the readme file and add some tests. Ensure that i18n also
works for docs/ etc.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
Co-authored-by: Andrew Thornton <art27@cantab.net>
- Add a new push mirror to specific repository
- Sync now ( send all the changes to the configured push mirrors )
- Get list of all push mirrors of a repository
- Get a push mirror by ID
- Delete push mirror by ID
Signed-off-by: Mohamed Sekour <mohamed.sekour@exfo.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
The LastCommitCache code is a little complex and there is unnecessary
duplication between the gogit and nogogit variants.
This PR adds the LastCommitCache as a field to the git.Repository and
pre-creates it in the ReferencesGit helpers etc. There has been some
simplification and unification of the variant code.
Signed-off-by: Andrew Thornton <art27@cantab.net>
- When a repository has a pull request template, it will always override
the current content. With this PR it will prepend content to the
template content when appropriate. This is similar how GitHub(and GitLab
I presume) does it and it saves developers time to not go open their
commit and copy paste their will written commit message.
When viewing a subdirectory and the latest commit to that directory in
the table, the commit status icon incorrectly showed the status of the
HEAD commit instead of the latest for that directory.
Support synchronizing with the push mirrors whenever new commits are pushed or synced from pull mirror.
Related Issues: #18220
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Check if project has the same repository id with issue when assign project to issue
* Check if issue's repository id match project's repository id
* Add more permission checking
* Remove invalid argument
* Fix errors
* Add generic check
* Remove duplicated check
* Return error + add check for new issues
* Apply suggestions from code review
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
* Prototyping
* Start work on creating offsets
* Modify tests
* Start prototyping with actual MPH
* Twiddle around
* Twiddle around comments
* Convert templates
* Fix external languages
* Fix latest translation
* Fix some test
* Tidy up code
* Use simple map
* go mod tidy
* Move back to data structure
- Uses less memory by creating for each language a map.
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Add some comments
* Fix tests
* Try to fix tests
* Use en-US as defacto fallback
* Use correct slices
* refactor (#4)
* Remove TryTr, add log for missing translation key
* Refactor i18n
- Separate dev and production locale stores.
- Allow for live-reloading in dev mode.
Co-authored-by: zeripath <art27@cantab.net>
* Fix live-reloading & check for errors
* Make linter happy
* live-reload with periodic check (#5)
* Fix tests
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
If there are dangling stopwatches with missing issues there will be repeated
logging of Unable to APIFormat stopwatches. These are unhelpful and instead
we should only log if the error is not an issue not exist error.
And we should also prevent an error on missing issue in GetActiveStopwatch too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow render HTML with css/js external links
* Fix bug because of filename escape chars
* Fix lint
* Update docs about new configuration item
* Fix bug of render HTML in sub directory
* Add CSP head for displaying iframe in rendering file
* Fix test
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Some improvements
* some improvement
* revert change in SanitizerDisabled of external renderer
* Add sandbox for iframe and support allow-scripts and allow-same-origin
* refactor
* fix
* fix lint
* fine tune
* use single option RENDER_CONTENT_MODE, use sandbox=allow-scripts
* fine tune CSP
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Move access and repo permission to models/perm/access
* fix test
* fix git test
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move issues related code to models/issues
* Move some issues related sub package
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
* Rename some files
* Move access and repo permission to models/perm/access
* fix test
* Move some git related files into sub package models/git
* Fix build
* fix git test
* move lfs to sub package
* move more git related functions to models/git
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
Automatically add sidebar in the wiki view containing a TOC for the wiki page.
Make the TOC collapsable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure minimum mirror interval is reported on settings page
Expecting users to guess the minimum mirror interval appears a little unkind.
In this PR we simply change the locale string to include the minimum interval.
This will of course be affected by our current localization framework but...
we can fix that else where.
This PR also includes some fixes for error handling on the settings page as
previously the mirror block amongst others would simply disappear on error.
Fix#3737
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move some repository related code into sub package
* Move more repository functions out of models
* Fix lint
* Some performance optimization for webhooks and others
* some refactors
* Fix lint
* Fix
* Update modules/repository/delete.go
Co-authored-by: delvh <dev.lh@web.de>
* Fix test
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
Co-authored-by: delvh <dev.lh@web.de>
- To use the web's API to get information about a issue/pull on a
repository, doesn't require authorization(nor that the repository isn't
archived).
- Regressed by: #19318
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Although the use of LastModified dates for caching of git objects should be
discouraged (as it is not native to git - and there are a LOT of ways this
could be incorrect) - LastModified dates can be a helpful somewhat more human
way of caching for simple cases.
This PR adds this header and handles the If-Modified-Since header to the /raw/
routes.
Fix#18354
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Fix indention
Signed-off-by: kolaente <k@knt.li>
* Add option to merge a pr right now without waiting for the checks to succeed
Signed-off-by: kolaente <k@knt.li>
* Fix lint
Signed-off-by: kolaente <k@knt.li>
* Add scheduled pr merge to tables used for testing
Signed-off-by: kolaente <k@knt.li>
* Add status param to make GetPullRequestByHeadBranch reusable
Signed-off-by: kolaente <k@knt.li>
* Move "Merge now" to a seperate button to make the ui clearer
Signed-off-by: kolaente <k@knt.li>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Re-add migration after merge
* Fix frontend lint
* Fix version compare
* Add vendored dependencies
* Add basic tets
* Make sure the api route is capable of scheduling PRs for merging
* Fix comparing version
* make vendor
* adopt refactor
* apply suggestion: User -> Doer
* init var once
* Fix Test
* Update templates/repo/issue/view_content/comments.tmpl
* adopt
* nits
* next
* code format
* lint
* use same name schema; rm CreateUnScheduledPRToAutoMergeComment
* API: can not create schedule twice
* Add TestGetBranchNamesForSha
* nits
* new go routine for each pull to merge
* Update models/pull.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix & add renaming sugestions
* Update services/automerge/pull_auto_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix conflict relicts
* apply latest refactors
* fix: migration after merge
* Update models/error.go
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* adapt latest refactors
* fix test
* use more context
* skip potential edgecases
* document func usage
* GetBranchNamesForSha() -> GetRefsBySha()
* start refactoring
* ajust to new changes
* nit
* docu nit
* the great check move
* move checks for branchprotection into own package
* resolve todo now ...
* move & rename
* unexport if posible
* fix
* check if merge is allowed before merge on scheduled pull
* debugg
* wording
* improve SetDefaults & nits
* NotAllowedToMerge -> DisallowedToMerge
* fix test
* merge files
* use package "errors"
* merge files
* add string names
* other implementation for gogit
* adapt refactor
* more context for models/pull.go
* GetUserRepoPermission use context
* more ctx
* use context for loading pull head/base-repo
* more ctx
* more ctx
* models.LoadIssueCtx()
* models.LoadIssueCtx()
* Handle pull_service.Merge in one DB transaction
* add TODOs
* next
* next
* next
* more ctx
* more ctx
* Start refactoring structure of old pull code ...
* move code into new packages
* shorter names ... and finish **restructure**
* Update models/branches.go
Co-authored-by: zeripath <art27@cantab.net>
* finish UpdateProtectBranch
* more and fix
* update datum
* template: use "svg" helper
* rename prQueue 2 prPatchCheckerQueue
* handle automerge in queue
* lock pull on git&db actions ...
* lock pull on git&db actions ...
* add TODO notes
* the regex
* transaction in tests
* GetRepositoryByIDCtx
* shorter table name and lint fix
* close transaction bevore notify
* Update models/pull.go
* next
* CheckPullMergable check all branch protections!
* Update routers/web/repo/pull.go
* CheckPullMergable check all branch protections!
* Revert "PullService lock via pullID (#19520)" (for now...)
This reverts commit 6cde7c9159a5ea75a10356feb7b8c7ad4c434a9a.
* Update services/pull/check.go
* Use for a repo action one database transaction
* Apply suggestions from code review
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* use db.WithTx()
* gofmt
* make pr.GetDefaultMergeMessage() context aware
* make MergePullRequestForm.SetDefaults context aware
* use db.WithTx()
* pull.SetMerged only with context
* fix deadlock in `test-sqlite\#TestAPIBranchProtection`
* dont forget templates
* db.WithTx allow to set the parentCtx
* handle db transaction in service packages but not router
* issue_service.ChangeStatus just had caused another deadlock :/
it has to do something with how notification package is handled
* if we merge a pull in one database transaktion, we get a lock, because merge infoce internal api that cant handle open db sessions to the same repo
* ajust to current master
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* dont open db transaction in router
* make generate-swagger
* one _success less
* wording nit
* rm
* adapt
* remove not needed test files
* rm less diff & use attr in JS
* ...
* Update services/repository/files/commit.go
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* ajust db schema for PullAutoMerge
* skip broken pull refs
* more context in error messages
* remove webUI part for another pull
* remove more WebUI only parts
* API: add CancleAutoMergePR
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* fix lint
* Apply suggestions from code review
* cancle -> cancel
Co-authored-by: delvh <dev.lh@web.de>
* change queue identifyer
* fix swagger
* prevent nil issue
* fix and dont drop error
* as per @zeripath
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* more declarative integration tests (dedup code)
* use assert.False/True helper
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds a feature [like GitHub has](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request-from-a-fork) (step 7).
If you create a new PR from a forked repo, you can select (and change later, but only if you are the PR creator/poster) the "Allow edits from maintainers" option.
Then users with write access to the base branch get more permissions on this branch:
* use the update pull request button
* push directly from the command line (`git push`)
* edit/delete/upload files via web UI
* use related API endpoints
You can't merge PRs to this branch with this enabled, you'll need "full" code write permissions.
This feature has a pretty big impact on the permission system. I might forgot changing some things or didn't find security vulnerabilities. In this case, please leave a review or comment on this PR.
Closes#17728
Co-authored-by: 6543 <6543@obermui.de>
This gets the necessary data to the issuelist for it to support a clickable commit status icon which pops up the full list of commit statuses related to the commit. It accomplishes this without any additional queries or fetching as the existing codepath was already doing the necessary work but only returning the "last" status. All methods were wrapped to call the least-filtered version of each function in order to maximize code reuse.
Note that I originally left `getLastCommitStatus()` in `pull.go` which called to the new function, but `make lint` complained that it was unused, so I removed it. I would have preferred to keep it, but alas.
The only thing I'd still like to do here is force these popups to happen to the right by default instead of the left. I see that the only other place this is popping up right is on view_list.tmpl, but I can't figure out how/why right now.
Fixes#18810
* Improve dashboard's repo list performance
- Avoid a lot of database lookups for all the repo's, by adding a
undocumented "minimal" mode for this specific task, which returns the
data that's only needed by this list which doesn't require any database
lookups.
- Makes fetching these list faster.
- Less CPU overhead when a user visits home page.
* Refactor javascript code + fix Fork icon
- Use async in the function so we can use `await`.
- Remove `archivedFilter` check for count, as it doesn't make sense to
show the count of repos when you can't even see them(as they are
filited away).
* Add `count_only`
* Remove uncessary code
* Improve comment
Co-authored-by: delvh <dev.lh@web.de>
* Update web_src/js/components/DashboardRepoList.js
Co-authored-by: delvh <dev.lh@web.de>
* Update web_src/js/components/DashboardRepoList.js
Co-authored-by: delvh <dev.lh@web.de>
* By default apply minimal mode
* Remove `minimal` paramater
* Refactor count header
* Simplify init
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
When a mirror repo interval is updated by the UI it is rescheduled with that interval
however the API does not do this. The API also lacks the enable_prune option.
This PR adds this functionality in to the API Edit Repo endpoint.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Reusing `/api/v1` from Gitea UI Pages have pros and cons.
Pros:
1) Less code copy
Cons:
1) API/v1 have to support shared session with page requests.
2) You need to consider for each other when you want to change something about api/v1 or page.
This PR moves all dependencies to API/v1 from UI Pages.
Partially replace #16052
Remove two unmaintained vendor packages `i18n` and `paginater`. Changes:
* Rewrite `i18n` package with a more clear fallback mechanism. Fix an unstable `Tr` behavior, add more tests.
* Refactor the legacy `Paginater` to `Paginator`, test cases are kept unchanged.
Trivial enhancement (no breaking for end users):
* Use the first locale in LANGS setting option as the default, add a log to prevent from surprising users.
The main purpose is to refactor the legacy `unknwon/com` package.
1. Remove most imports of `unknwon/com`, only `util/legacy.go` imports the legacy `unknwon/com`
2. Use golangci's depguard to process denied packages
3. Fix some incorrect values in golangci.yml, eg, the version should be quoted string `"1.18"`
4. Use correctly escaped content for `go-import` and `go-source` meta tags
5. Refactor `com.Expand` to our stable (and the same fast) `vars.Expand`, our `vars.Expand` can still return partially rendered content even if the template is not good (eg: key mistach).
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
This make checks in one single place so they dont differ and maintainer can not forget a check in one place while adding it to the other .... ( as it's atm )
Fix:
* The API does ignore issue dependencies where Web does not
* The API checks if "IsSignedIfRequired" where Web does not - UI probably do but nothing will some to craft custom requests
* Default merge message is crafted a bit different between API and Web if not set on specific cases ...
This follows
* https://github.com/go-gitea/gitea/issues/18553
Introduce `RunWithContextString` and `RunWithContextBytes` to help the refactoring. Add related unit tests. They keep the same behavior to save stderr into err.Error() as `RunInXxx` before.
Remove `RunInDirTimeoutPipeline` `RunInDirTimeoutFullPipeline` `RunInDirTimeout` `RunInDirTimeoutEnv` `RunInDirPipeline` `RunInDirFullPipeline` `RunTimeout`, `RunInDirTimeoutEnvPipeline`, `RunInDirTimeoutEnvFullPipeline`, `RunInDirTimeoutEnvFullPipelineFunc`.
Then remaining `RunInDir` `RunInDirBytes` `RunInDirWithEnv` can be easily refactored in next PR with a simple search & replace:
* before: `stdout, err := RunInDir(path)`
* next: `stdout, _, err := RunWithContextString(&git.RunContext{Dir:path})`
Other changes:
1. When `timeout <= 0`, use default. Because `timeout==0` is meaningless and could cause bugs. And now many functions becomes more simple, eg: `GitGcRepos` 9 lines to 1 line. `Fsck` 6 lines to 1 line.
2. Only set defaultCommandExecutionTimeout when the option `setting.Git.Timeout.Default > 0`
The last PR about clone buttons introduced an JS error when visiting an empty repo page:
* https://github.com/go-gitea/gitea/pull/19028
* `Uncaught ReferenceError: isSSH is not defined`, because the variables are scoped and doesn't share between sub templates.
This:
1. Simplify `templates/repo/clone_buttons.tmpl` and make code clear
2. Move most JS code into `initRepoCloneLink`
3. Remove unused `CloneLink.Git`
4. Remove `ctx.Data["DisableSSH"] / ctx.Data["ExposeAnonSSH"] / ctx.Data["DisableHTTP"]`, and only set them when is is needed (eg: deploy keys / ssh keys)
5. Introduce `Data["CloneButton*"]` to provide data for clone buttons and links
6. Introduce `Data["RepoCloneLink"]` for the repo clone link (not the wiki)
7. Remove most `ctx.Data["PageIsWiki"]` because it has been set in the `/wiki` middleware
8. Remove incorrect `quickstart` class in `migrating.tmpl`
This PR adds a middleware which sets a ContextUser (like GetUserByParams before) in a single place which can be used by other methods. For routes which represent a repo or org the respective middlewares set the field too.
Also fix a bug in modules/context/org.go during refactoring.
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Extend issues/new/choose to pass the project id and change New Issue
link on project page to use new/choose
Fix#19170
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
We can't depend on `latest` version of gofumpt because the output will
not be stable across versions. Lock it down to the latest version
released yesterday and run it again.
* Fix display time of milestones
* Move the SecToTime function
From the models/issue_stopwatch.go file to the modules/util package
* Rename the sec_to_time file
* Updated formatting
* Include copyright notice in sec_to_time.go
* Apply PR review suggestions
- Update copyright notice dates to 2022
- Change `1 day 3h 5min 7s` to `1d 3h 5m 7s`
* Rename hrs var and combine conditions
* Update unit tests to match new time pattern
Changed `1min` to `1m`
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This code adds a simple endpoint to apply patches to repositories and
branches on gitea. This is then used along with the conflicting checking
code in #18004 to provide a basic implementation of cherry-pick revert.
Now because the buttons necessary for cherry-pick and revert have
required us to create a dropdown next to the Browse Source button
I've also implemented Create Branch and Create Tag operations.
Fix#3880Fix#17986
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove unnecessary web context data fields, and unify the i18n/translation related functions to `Locale`
* in development, show an error if a translation key is missing
* remove the unnecessary loops `for _, lang := range translation.AllLangs()` for every request, which improves the performance slightly
* use `ctx.Locale.Language()` instead of `ctx.Data["Lang"].(string)`
* add more comments about how the Locale/LangType fields are used
It appears that the blob-excerpt links do not work on the wiki - likely since their
introduction.
This PR adds support for the wiki on these links.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Collaborator trust model should trust collaborators
There was an unintended regression in #17917 which leads to only
repository admin commits being trusted. This PR restores the old logic.
Fix#18501
Signed-off-by: Andrew Thornton <art27@cantab.net>
The endpoint /{username}/{reponame}/milestone/{id} is not currently restricted to
the repo. This PR restricts the milestones to those within the repo.
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Pass the Global command args into serviceRPC.
- Fixes error with partial cloning.
- Add partial clone test
- Include diff
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add config option to hide issue events
Adds a config option `HIDE_ISSUE_EVENTS` to hide most issue events (changed labels, milestones, projects...) on the issue detail page.
If this is true, only the following events (comment types) are shown:
* plain comments
* closed/reopned/merged
* reviews
* Make configurable using a list
* Add docs
* Add missing newline
* Fix merge issues
* Allow changes per user settings
* Fix lint
* Rm old docs
* Apply suggestions from code review
* Use bitsets
* Rm comment
* fmt
* Fix lint
* Use variable/constant to provide key
* fmt
* fix lint
* refactor
* Add a prefix for user setting key
* Add license comment
* Add license comment
* Update services/forms/user_form_hidden_comments.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* check len == 0
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
When generating the commits list and number of files changed for PRs and
compare we should use "..." always not "..".
Fix#18303
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fix#17514
Given the comments I've adjusted this somewhat. The numbers of characters detected are increased and include things like the use of U+300 to make à instead of à and non-breaking spaces.
There is a button which can be used to escape the content to show it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gwyneth Morgan <gwymor@tilde.club>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR reworked the Find pointer files feature in Settings -> LFS page.
When a LFS object is missing from database but exists in LFS content store, admin can associate it to the repository by clicking the Associate button.
This PR is not perfect (because the LFS module itself should be improved too), it's just a nice-to-have feature to help users recover their LFS repositories (eg: database was lost / table was truncated)
User would keep seeing an empty repo if:
* An error occurs during the first git pushing/receiving
* A user replaces the Gitea's empty repository manually
Fix: when a user is viewing the repository web page, if the repoModal.IsEmpty is true, we check the git repository again to detect whether it is really empty.
However: the IsEmpty flag is deeply broken and should be removed. For example it's possible for a repository to be non-empty by that flag but still 500 because there are no branches - only tags -or the default branch is non-extant as it has been 0-pushed.
Git will and can pack references into packfiles and therefore if you write/read the
files directly you will get false results. Instead you should use update-ref and
show-ref. To that end I have created three new functions in git/repo_commit.go that
will do this correctly.
Related #17191
Signed-off-by: Andrew Thornton <art27@cantab.net>
Repository Transfer requires that the repository directory is renamed - which
is not possible on Windows if the git repository is open.
Fix#17885
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Abort merge if head has been updated before pressing merge
It is possible that a PR head may be pushed to between the merge page being shown
and the merge button being pressed. Pass the current expected head in as a parameter
and cancel the merge if it has changed.
Fix#18028
Signed-off-by: Andrew Thornton <art27@cantab.net>
* adjust swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR contains multiple fixes. The most important of which is:
* Prevent hang in git cat-file if the repository is not a valid repository
Unfortunately it appears that if git cat-file is run in an invalid
repository it will hang until stdin is closed. This will result in
deadlocked /pulls pages and dangling git cat-file calls if a broken
repository is tried to be reviewed or pulls exists for a broken
repository.
Fix#14734Fix#9271Fix#16113
Otherwise there are a few small other fixes included which this PR was initially intending to fix:
* Fix panic on partial compares due to missing PullRequestWorkInProgressPrefixes
* Fix links on pulls pages due to regression from #17551 - by making most /issues routes match /pulls too - Fix#17983
* Fix links on feeds pages due to another regression from #17551 but also fix issue with syncing tags - Fix#17943
* Add missing locale entries for oauth group claims
* Prevent NPEs if ColorFormat is called on nil users, repos or teams.
Move the more relevant sections of the page title earlier which make it
possible to distinguish multiple tabs from each other when tab width is
limited.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add missing `X-Total-Count` and fix some related bugs
Adds `X-Total-Count` header to APIs that return a list but doesn't have it yet.
Fixed bugs:
* not returned after reporting error (39eb82446c/routers/api/v1/user/star.go (L70))
* crash with index out of bounds, API issue/issueSubscriptions
I also found various endpoints that return lists but do not apply/support pagination yet:
```
/repos/{owner}/{repo}/issues/{index}/labels
/repos/{owner}/{repo}/issues/comments/{id}/reactions
/repos/{owner}/{repo}/branch_protections
/repos/{owner}/{repo}/contents
/repos/{owner}/{repo}/hooks/git
/repos/{owner}/{repo}/issue_templates
/repos/{owner}/{repo}/releases/{id}/assets
/repos/{owner}/{repo}/reviewers
/repos/{owner}/{repo}/teams
/user/emails
/users/{username}/heatmap
```
If this is not expected, an new issue should be opened.
Closes#13043
* fmt
* Update routers/api/v1/repo/issue_subscription.go
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
* Use FindAndCount
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
* Move keys to models/keys
* Rename models/keys -> models/asymkey
* change the missed package name
* Fix package alias
* Fix test
* Fix docs
* Fix test
* Fix test
* merge
Since we are using EasyMDE now, we do not need to keep the SimpleMDE code anymore.
This PR removes all legacy SimpleMDE code, and makes some related changes:
* `createCommentEasyMDE` can accept native DOM element, and it doesn't need `jQuery.data` to store EasyMDE editor object (as discussed about the frontend guideline).
* introduce `getAttachedEasyMDE` to get the attached EasyMDE editor object, it's easier to find all the usage of EasyMDE.
* rename variable names from `$simplemde` to `easyMDE`, the `$` was incorrect because it is a EasyMDE editor, not a jQuery object.
With this PR, it will be easier to do more refactoring or replacing EasyMDE with other editors.
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
The current implementation of checkBranchName is highly inefficient
involving opening the repository, the listing all of the branch names
checking them individually before then using using opened repo to get
the tags.
This PR avoids this by simply walking the references from show-ref
instead of opening the repository (in the nogogit case).
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove unnecessary functions of User struct
* Move more database methods out of user struct
* Move more database methods out of user struct
* Fix template failure
* Fix bug
* Remove finished FIXME
* remove unnecessary code
* Allow Loading of Diffs that are too large
This PR allows the loading of diffs that are suppressed because the file
is too large. It does not handle diffs of files which have lines which
are too long.
Fix#17738
Signed-off-by: Andrew Thornton <art27@cantab.net>
Use hostmacher to replace matchlist.
And we introduce a better DialContext to do a full host/IP check, otherwise the attackers can still bypass the allow/block list by a 302 redirection.
* Use a standalone struct name for Organization
* recover unnecessary change
* make the code readable
* Fix template failure
* Fix template failure
* Move HasMemberWithUserID to org
* Fix test
* Remove unnecessary user type check
* Fix test
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Resolves#14574
- Adds the necessary code to have pagination working in the forks list of
a repo. The code is mostly in par with the stars/watcher implementation.
Use check attribute code to check the assigned language of a file and send that in to
chroma as a hint for the language of the file.
Signed-off-by: Andrew Thornton <art27@cantab.net>
There are multiple places where Gitea does not properly escape URLs that it is building and there are multiple places where it builds urls when there is already a simpler function available to use this.
This is an extensive PR attempting to fix these issues.
1. The first commit in this PR looks through all href, src and links in the Gitea codebase and has attempted to catch all the places where there is potentially incomplete escaping.
2. Whilst doing this we will prefer to use functions that create URLs over recreating them by hand.
3. All uses of strings should be directly escaped - even if they are not currently expected to contain escaping characters. The main benefit to doing this will be that we can consider relaxing the constraints on user names and reponames in future.
4. The next commit looks at escaping in the wiki and re-considers the urls that are used there. Using the improved escaping here wiki files containing '/'. (This implementation will currently still place all of the wiki files the root directory of the repo but this would not be difficult to change.)
5. The title generation in feeds is now properly escaped.
6. EscapePound is no longer needed - urls should be PathEscaped / QueryEscaped as necessary but then re-escaped with Escape when creating html with locales Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Correctly handle failed migrations
There is a bug in handling failed migrations whereby the migration task gets decoupled
from the migration repository. This leads to a failure of the task to get deleted with
the repository and also leads to the migration failed page resulting in a ISE.
This PR removes the zeroing out of the task id from the migration but also makes
the migration handler tolerate missing tasks much nicer.
Fix#17571
Signed-off-by: Andrew Thornton <art27@cantab.net>
* feat: Allow multiple tags on comments
- Allow for multiples tags(Currently Poster + {Owner, Writer}).
- Utilize the Poster tag within the commentTag function and remove the
checking from templates.
- Use bitwise on CommentTags to enable specific tags.
- Don't show poster tag(view_content.tmpl) on the initial issue comment.
* Change parameters naming
* Change function name
* refactor variable wording
* Merge 'master' branch into 'tags-comments' branch
* Change naming
* `tag` -> `role`
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Hide label comments if labels were added and removed immediately
* Add comment and rename var
* Fix unit test
* Add test case
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The call to html.EscapeString in routers/web/repo/blame.go:renderBlame is extraneous
as the commit message is now rendered by the template. The template will correctly
escape strings - therefore we are currently double escaping.
This PR fixes this.
Fix#17492
Signed-off-by: Andrew Thornton <art27@cantab.net>
zeripath