Unfortunately #18789 disabled autoregistration using email addresses as they would
be shortcut to email address does not exist.
This PR attempts to restore autoregistration by allowing an unknown email address
to percolate through to the autoregistration path of UserSignin.
Fix#19256
Signed-off-by: Andrew Thornton <art27@cantab.net>
This follows
* https://github.com/go-gitea/gitea/issues/18553
Introduce `RunWithContextString` and `RunWithContextBytes` to help the refactoring. Add related unit tests. They keep the same behavior to save stderr into err.Error() as `RunInXxx` before.
Remove `RunInDirTimeoutPipeline` `RunInDirTimeoutFullPipeline` `RunInDirTimeout` `RunInDirTimeoutEnv` `RunInDirPipeline` `RunInDirFullPipeline` `RunTimeout`, `RunInDirTimeoutEnvPipeline`, `RunInDirTimeoutEnvFullPipeline`, `RunInDirTimeoutEnvFullPipelineFunc`.
Then remaining `RunInDir` `RunInDirBytes` `RunInDirWithEnv` can be easily refactored in next PR with a simple search & replace:
* before: `stdout, err := RunInDir(path)`
* next: `stdout, _, err := RunWithContextString(&git.RunContext{Dir:path})`
Other changes:
1. When `timeout <= 0`, use default. Because `timeout==0` is meaningless and could cause bugs. And now many functions becomes more simple, eg: `GitGcRepos` 9 lines to 1 line. `Fsck` 6 lines to 1 line.
2. Only set defaultCommandExecutionTimeout when the option `setting.Git.Timeout.Default > 0`
Strangely #19038 appears to relate to an issue whereby a tag appears to
be listed in `git show-ref --tags` but then does not appear when `git
show-ref --tags -- short_name` is called.
As a solution though I propose to stop the second call as it is
unnecessary and only likely to cause problems.
I've also noticed that the tags calls are wildly inefficient and aren't using the common cat-files - so these have been added.
I've also noticed that the git commit-graph is not being written on mirroring - so I've also added writing this to the migration which should improve mirror rendering somewhat.
Fix#19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
There is yet another problem with conflicted files not being reset when
the test patch resolves them.
This PR adjusts the code for checkConflicts to reset the ConflictedFiles
field immediately at the top. It also adds a reset to conflictedFiles
for the manuallyMerged and a shortcut for the empty status in
protectedfiles.
Signed-off-by: Andrew Thornton <art27@cantab.net>
As discussed on #19221 we should store the results of the last task message on the
crontask and show them on the monitor page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds the necessary work to make it possible to create files on empty
repos using the API.
Fix#10993
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove the global methods but create dynamiclly
* Fix lint
* Fix windows lint
* Fix windows lint
* some improvements
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There is a bug in the system webhooks whereby the active state is not checked when
webhooks are prepared and there is a bug that deactivating webhooks do not prevent
queued deliveries.
* Only add SystemWebhooks to the prepareWebhooks list if they are active
* At the time of delivery if the underlying webhook is not active mark it
as "delivered" but with a failed delivery so it does not get delivered.
Fix#19220
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Touch mirrors on even on fail to update
If a mirror fails to be synchronised it should be pushed to the bottom of the queue
of the awaiting mirrors to be synchronised. At present if there LIMIT number of
broken mirrors they can effectively prevent all other mirrors from being synchronized
as their last_updated time will remain earlier than other mirrors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Change all cron tasks to make them no notice on success default. Instead if a user
wants notices on success they need to add NOTICE_ON_SUCCESS=true instead.
## ⚠️ BREAKING ⚠️
This changes the cron config so that notices on success are no longer set by default
and breaks NO_SUCCESS_NOTICE settings. Instead users who want notices on success
must set NOTICE_ON_SUCCESS=true instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update custom/conf/app.example.ini
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
This PR adds a middleware which sets a ContextUser (like GetUserByParams before) in a single place which can be used by other methods. For routes which represent a repo or org the respective middlewares set the field too.
Also fix a bug in modules/context/org.go during refactoring.
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Unfortunately many email readers will (helpfully) detect url or url-like names and
automatically create links to them, even in HTML emails. This is not ideal when
usernames can have dots in them.
This PR tries to prevent this behaviour by sticking ZWJ characters between dots and
also set the meta tag to prevent format detection.
Not every email template has been changed in this way - just the activation emails but
it may be that we should be setting the above meta tag in all of our emails too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
The adoption page checks directories to see if they are repositories by querying the
db on a per user basis. This can lead to problems if a user has a large number of
repositories or putative repositories.
This PR changes the buffering to check the db in IterataeBufferSize batches instead.
Fix#19137
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately fixing changes to `mail_issue.go` did not get included in #19131.
We also need to not send issue comment mails to deactivated users.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Make SKIP_TLS_VERIFY apply to git data migrations too through adding the `-c http.sslVerify=false` option to the git clone command.
Fix#18998
Signed-off-by: Andrew Thornton <art27@cantab.net>
Emails should not be sent to inactive users except for Activate and ResetPassword
messages.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Storing the foreign identifier of an imported issue in the database is a prerequisite to implement idempotent migrations or mirror for issues. It is a baby step towards mirroring that introduces a new table.
At the moment when an issue is created by the Gitea uploader, it fails if the issue already exists. The Gitea uploader could be modified so that, instead of failing, it looks up the database to find an existing issue. And if it does it would update the issue instead of creating a new one. However this is not currently possible because an information is missing from the database: the foreign identifier that uniquely represents the issue being migrated is not persisted. With this change, the foreign identifier is stored in the database and the Gitea uploader will then be able to run a query to figure out if a given issue being imported already exists.
The implementation of mirroring for issues, pull requests, releases, etc. can be done in three steps:
1. Store an identifier for the element being mirrored (issue, pull request...) in the database (this is the purpose of these changes)
2. Modify the Gitea uploader to be able to update an existing repository with all it contains (issues, pull request...) instead of failing if it exists
3. Optimize the Gitea uploader to speed up the updates, when possible.
The second step creates code that does not yet exist to enable idempotent migrations with the Gitea uploader. When a migration is done for the first time, the behavior is not changed. But when a migration is done for a repository that already exists, this new code is used to update it.
The third step can use the code created in the second step to optimize and speed up migrations. For instance, when a migration is resumed, an issue that has an update time that is not more recent can be skipped and only newly created issues or updated ones will be updated. Another example of optimization could be that a webhook notifies Gitea when an issue is updated. The code triggered by the webhook would download only this issue and call the code created in the second step to update the issue, as if it was in the process of an idempotent migration.
The ForeignReferences table is added to contain local and foreign ID pairs relative to a given repository. It can later be used for pull requests and other artifacts that can be mirrored. Although the foreign id could be added as a single field in issues or pull requests, it would need to be added to all tables that represent something that can be mirrored. Creating a new table makes for a simpler and more generic design. The drawback is that it requires an extra lookup to obtain the information. However, this extra information is only required during migration or mirroring and does not impact the way Gitea currently works.
The foreign identifier of an issue or pull request is similar to the identifier of an external user, which is stored in reactions, issues, etc. as OriginalPosterID and so on. The representation of a user is however different and the ability of users to link their account to an external user at a later time is also a logic that is different from what is involved in mirroring or migrations. For these reasons, despite some commonalities, it is unclear at this time how the two tables (foreign reference and external user) could be merged together.
The ForeignID field is extracted from the issue migration context so that it can be dumped in files with dump-repo and later restored via restore-repo.
The GetAllComments downloader method is introduced to simplify the implementation and not overload the Context for the purpose of pagination. It also clarifies in which context the comments are paginated and in which context they are not.
The Context interface is no longer useful for the purpose of retrieving the LocalID and ForeignID since they are now both available from the PullRequest and Issue struct. The Reviewable and Commentable interfaces replace and serve the same purpose.
The Context data member of PullRequest and Issue becomes a DownloaderContext to clarify that its purpose is not to support in memory operations while the current downloader is acting but is not otherwise persisted. It is, for instance, used by the GitLab downloader to store the IsMergeRequest boolean and sort out issues.
---
[source](https://lab.forgefriends.org/forgefriends/forgefriends/-/merge_requests/36)
Signed-off-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: Loïc Dachary <loic@dachary.org>
Yet another issue has come up where the logging from SyncMirrors does not provide
enough context. This PR adds more context to these logging events.
Related #19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
The review request feature was added in https://github.com/go-gitea/gitea/pull/10756,
where the doer got explicitly excluded from available reviewers. I don't see a
functionality or security related reason to forbid this case.
As shown by GitHubs implementation, it may be useful to self-request a review,
to be reminded oneselves about reviewing, while communicating to team mates that a
review is missing.
Co-authored-by: delvh <dev.lh@web.de>
* Use MirrorID instead of RepoID
- Use the MirrorID as index(SQL uses `id` column not the `repo_id`).
Passes the Mirror ID's into the Sync functions.
* Check for MirrorID == 0
* Fix `StartToMirror` + refactor
* Update services/mirror/mirror.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Add new feature to delete issues and pulls via API
Co-authored-by: fnetx <git@fralix.ovh>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* logs: add the buffer logger to inspect logs during testing
Signed-off-by: Loïc Dachary <loic@dachary.org>
* migrations: add test for importing pull requests in gitea uploader
Signed-off-by: Loïc Dachary <loic@dachary.org>
* for each git.OpenRepositoryCtx, call Close
* Content is expected to return the content of the log
* test for errors before defer
Co-authored-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
We can't depend on `latest` version of gofumpt because the output will
not be stable across versions. Lock it down to the latest version
released yesterday and run it again.
When migrating, g.issues is a map with all issues created during the
migration. If an issue is not found in g.issues when inserting a
comment or a review, it cannot exist in the database and trying to get
it via GetIssueByIndex() will always fail and return an error.
Signed-off-by: singuliere <singuliere@autistici.org>
`authenticator.Authenticate` has assume the login name is not an email, but `username` maybe an email. So when we find the user via email address, we should use `user.LoginName` instead of `username` which is an email address.
* Use email_address table to check user's email when login with email adress
* Update services/auth/signin.go
* Fix test
* Fix test
* Fix logging in with ldap username != loginname
* Fix if user does not exist yet
* Make more clear this is loginName
* Fix formatting
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
It appears possible that there could be a hang due to unread data from the
repo-attribute command pipes. This PR simply closes these during the defer.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add setting for a JSON that maps LDAP groups to Org Teams.
* Add log when removing or adding team members.
* Sync is being run on login and periodically.
* Existing group filter settings are reused.
* Adding and removing team members.
* Sync not existing LDAP group.
* Login with broken group map JSON.
This code adds a simple endpoint to apply patches to repositories and
branches on gitea. This is then used along with the conflicting checking
code in #18004 to provide a basic implementation of cherry-pick revert.
Now because the buttons necessary for cherry-pick and revert have
required us to create a dropdown next to the Browse Source button
I've also implemented Create Branch and Create Tag operations.
Fix#3880Fix#17986
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Restart zero worker if there is still work to do
It is possible for the zero worker to timeout before all the work is finished.
This may mean that work may take a long time to complete because a worker will only
be induced on repushing.
Also ensure that requested count is reset after pulls and push mirror sync requests and add some more trace logging to the queue push.
Fix#18607
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Run 'make fmt'
'make fmt' currently produces this change, I'm not sure how CI did not
fail on it, I made sure I have `mvdan.cc/gofumpt@latest`.
* Fix 'make fmt-check'
`make fmt-check` did not run all commands that `make fmt` did, resulting
in missed diffs. Fix that by just depending on the `fmt` target.
Includes: https://github.com/go-gitea/gitea/pull/18633
* Make gitea-fmt work with -l and -d and integrate gofumpt
This implements -l, -w and -d with gitea-fmt and merges gofumpt.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* use -l instead of -d for fmt-check
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
When calling DumpRepository and RestoreRepository on the same Gitea
instance, the users are preserved: all labels, issues etc. belong to
the external user who is, in this particular case, the local user.
Dead code verifying g.gitServiceType.Name() == "" (i.e. plain git) is
removed. The function is never called because the plain git downloader
does not migrate anything that is associated to a user, by definition.
Errors returned by GetUserIDByExternalUserID are no longer ignored.
The userMap is used when the external user is not kown, which is the
most common case. It was only used when the external user exists
which happens less often and, as a result, every occurence of an
unknown external user required a SQL query.
Signed-off-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Prevent merge messages from being sorted to the top of email chains
Gitea will currrently resend the same message-id for the closed/merged/reopened
messages for issues. This will cause the merged message to leap to the top of an
email chain and become out of sync.
This PR adds specific suffices for these actions.
Fix#18560
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Replace `sync.Map` with normal maps
- These maps aren't being used in any kind of concurrent read/write and
thus don't need `sync.Map` and can instead use normal maps.
- Special thanks to dachary.
- Added in: https://github.com/go-gitea/gitea/pull/6290
* Remove unannounced feature
* Detect conflicts with 3way merge
Unforunately git apply --3way reports conflicts differently than standard patches
resulting in conflicts being missed.
Adjust the conflict detection code to account for this different error reporting.
Fix#18514
Signed-off-by: Andrew Thornton <art27@cantab.net>
* and three-way failed
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* add test coverage for original author conversion during migrations
And create a function to factorize a code snippet that is repeated
five times and would otherwise be more difficult to test and maintain
consistently.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* fix variable scope and int64 formatting
* add missing calls to remapExternalUser and fix misplaced %d
Co-authored-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* GitLab reviews may not have the updated_at field set
Fallback to created_at if that the case and to time.Now() if it is
also missing.
Fixes: 18434
* use assert.WithinDuration
Co-authored-by: Loïc Dachary <loic@dachary.org>
- Pass the Global command args into serviceRPC.
- Fixes error with partial cloning.
- Add partial clone test
- Include diff
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Start adding mechanism to return unhandled data
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create pushback interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Pausable interface to WorkerPool and Manager
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and PushBack for the bytefifos
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and Pushback for ChannelQueues and ChannelUniqueQueues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Wire in UI for pausing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcases and fix a few issues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix build
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prevent "race" in the test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix jsoniter mismerge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix conflicts
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix format
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add warnings for no worker configurations and prevent data-loss with redis/levelqueue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use StopTimer
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add config option to hide issue events
Adds a config option `HIDE_ISSUE_EVENTS` to hide most issue events (changed labels, milestones, projects...) on the issue detail page.
If this is true, only the following events (comment types) are shown:
* plain comments
* closed/reopned/merged
* reviews
* Make configurable using a list
* Add docs
* Add missing newline
* Fix merge issues
* Allow changes per user settings
* Fix lint
* Rm old docs
* Apply suggestions from code review
* Use bitsets
* Rm comment
* fmt
* Fix lint
* Use variable/constant to provide key
* fmt
* fix lint
* refactor
* Add a prefix for user setting key
* Add license comment
* Add license comment
* Update services/forms/user_form_hidden_comments.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* check len == 0
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* Refactor jwt.StandardClaims to RegisteredClaims
go-jwt/jwt has deprecated the StandardClaims interface to use RegisteredClaims
instead. This PR migrates to use this new format.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately #17643 prevented all propagation of ErrDependenciesLeft meaning
that dependency errors that prevent closing of issues get swallowed.
This PR restores propagation of the error but instead swallows the error in the
places where it needs to be swallowed.
Fix#18223
Signed-off-by: Andrew Thornton <art27@cantab.net>
When generating the commits list and number of files changed for PRs and
compare we should use "..." always not "..".
Fix#18303
Signed-off-by: Andrew Thornton <art27@cantab.net>
We need to use the cached .gitattributes file for checking if a file
should be stored in the lfs.
Fix#18297
Signed-off-by: Andrew Thornton <art27@cantab.net>
The CheckRepoStats function missed the following counters:
- label num_closed_issues & num_closed_pulls
- milestone num_closed_issues & num_closed_pulls
The update SQL statements for updating the repository
num_closed_issues & num_closed_pulls fields were repeated in three
functions (repo.CheckRepoStats, migrate.insertIssues and
models.Issue.updateClosedNum) and were moved to a single helper.
The UpdateRepoStats is implemented and called in the Finish migration method so that it happens immediately instead of wating for the
CheckRepoStats to run.
Signed-off-by: Loïc Dachary loic@dachary.org
---
[source](https://lab.forgefriends.org/forgefriends/forgefriends/-/merge_requests/34)
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#17514
Given the comments I've adjusted this somewhat. The numbers of characters detected are increased and include things like the use of U+300 to make à instead of à and non-breaking spaces.
There is a button which can be used to escape the content to show it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gwyneth Morgan <gwymor@tilde.club>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It appears that several versions of sendmail require that the mail is sent to them with
LF line endings instead of CRLF endings - which of course they will then convert back
to CRLF line endings to comply with the SMTP standard.
This PR adds another setting SENDMAIL_CONVERT_CRLF which will pass the message writer
through a filter. This will filter out and convert CRLFs to LFs before writing them
out to sendmail.
Fix#18024
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* fix
* gofumpt
* Integration test for migration (#18124)
integrations: basic test for Gitea {dump,restore}-repo
This is a first step for integration testing of DumpRepository and
RestoreRepository. It:
runs a Gitea server,
dumps a repo via DumpRepository to the filesystem,
restores the repo via RestoreRepository from the filesystem,
dumps the restored repository to the filesystem,
compares the first and second dump and expects them to be identical
The verification is trivial and the goal is to add more tests for each
topic of the dump.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* Fix bug
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
- The current implementation of `RandomString` doesn't give you a most-possible unique randomness. It gives you 6*`length` instead of the possible 8*`length` bits(or as `length`x bytes) randomness. This is because `RandomString` is being limited to a max value of 63, this in order to represent the random byte as a letter/digit.
- The recommendation of pbkdf2 is to use 64+ bit salt, which the `RandomString` doesn't give with a length of 10, instead of increasing 10 to a higher number, this patch adds a new function called `RandomBytes` which does give you the guarentee of 8*`length` randomness and thus corresponding of `length`x bytes randomness.
- Use hexadecimal to store the bytes value in the database, as mentioned, it doesn't play nice in order to convert it to a string. This will always be a length of 32(with `length` being 16).
- When we detect on `Authenticate`(source: db) that a user has the old format of salt, re-hash the password such that the user will have it's password hashed with increased salt.
Thanks to @zeripath for working out the rouge edges from my first commit 😄.
Co-authored-by: lafriks <lauris@nix.lv>
Co-authored-by: zeripath <art27@cantab.net>
The total count returned by ListUnadoptedRepositories is incorrectly
calculated.
The code snippet within ListUnadoptedRepositories used to verify
unadopted repositories is repeated three times in the function. It is
moved in the checkUnadoptedRepositories function and a unit test is
added to verify it works as expected.
A unit test is added to verify the total count returned by
ListUnadoptedRepositories is as expected.
Signed-off-by: singuliere <singuliere@autistici.org>
Although #18004 will seriously reduce the likelihood of finding
conflicts in the first place - one bug was introduced whereby the
conflicted files status was not being reset properly. This leads to
conflicted PRs remaining conflicted when the conflict has been resolved.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Git will and can pack references into packfiles and therefore if you write/read the
files directly you will get false results. Instead you should use update-ref and
show-ref. To that end I have created three new functions in git/repo_commit.go that
will do this correctly.
Related #17191
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset Session ID on login
When logging in the SessionID should be reset and the session cleaned up.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* with new session.RegenerateID function
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update go-chi/session
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure that session id is changed after oauth data is set and between account linking pages too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
zeripath