4.3 KiB
4.3 KiB
General
The top-level configuration for GoToSocial, including basic things like host, port, bind address and transport protocol.
The only things you really need to set here are host, which should be the hostname where your instance is reachable, and probably port.
Settings
###########################
##### GENERAL CONFIG ######
###########################
# String. Log level to use throughout the application. Must be lower-case.
# Options: ["trace","debug","info","warn","error","fatal"]
# Default: "info"
log-level: "info"
# Bool. Log database queries when log-level is set to debug or trace.
# This setting produces verbose logs, so it's better to only enable it
# when you're trying to track an issue down.
# Options: [true, false]
# Default: false
log-db-queries: false
# String. Application name to use internally.
# Examples: ["My Application","gotosocial"]
# Default: "gotosocial"
application-name: "gotosocial"
# String. Hostname that this server will be reachable at. Defaults to localhost for local testing,
# but you should *definitely* change this when running for real, or your server won't work at all.
# DO NOT change this after your server has already run once, or you will break things!
# Examples: ["gts.example.org","some.server.com"]
# Default: "localhost"
host: "localhost"
# String. Domain to use when federating profiles. This is useful when you want your server to be at
# eg., "gts.example.org", but you want the domain on accounts to be "example.org" because it looks better
# or is just shorter/easier to remember.
#
# To make this setting work properly, you need to redirect requests at "example.org/.well-known/webfinger"
# to "gts.example.org/.well-known/webfinger" so that GtS can handle them properly.
#
# You should also redirect requests at "example.org/.well-known/nodeinfo" in the same way.
# An empty string (ie., not set) means that the same value as 'host' will be used.
#
# DO NOT change this after your server has already run once, or you will break things!
#
# Please read the appropriate section of the installation guide before you go messing around with this setting:
# https://docs.gotosocial.org/installation_guide/advanced/#can-i-host-my-instance-at-fediexampleorg-but-have-just-exampleorg-in-my-username
#
# Examples: ["example.org","server.com"]
# Default: ""
account-domain: ""
# String. Protocol to use for the server. Only change to http for local testing!
# This should be the protocol part of the URI that your server is actually reachable on. So even if you're
# running GoToSocial behind a reverse proxy that handles SSL certificates for you, instead of using built-in
# letsencrypt, it should still be https.
# Options: ["http","https"]
# Default: "https"
protocol: "https"
# String. Address to bind the GoToSocial server to.
# This can be an IPv4 address or an IPv6 address (surrounded in square brackets), or a hostname.
# Default value will bind to all interfaces.
# You probably won't need to change this unless you're setting GoToSocial up in some fancy way or
# you have specific networking requirements.
# Examples: ["0.0.0.0", "172.128.0.16", "localhost", "[::]", "[2001:db8::fed1]"]
# Default: "0.0.0.0"
bind-address: "0.0.0.0"
# Int. Listen port for the GoToSocial webserver + API. If you're running behind a reverse proxy and/or in a docker,
# container, just set this to whatever you like (or leave the default), and make sure it's forwarded properly.
# If you are running with built-in letsencrypt enabled, and running GoToSocial directly on a host machine, you will
# probably want to set this to 443 (standard https port), unless you have other services already using that port.
# This *MUST NOT* be the same as the letsencrypt port specified below, unless letsencrypt is turned off.
# Examples: [443, 6666, 8080]
# Default: 8080
port: 8080
# Array of string. CIDRs or IP addresses of proxies that should be trusted when determining real client IP from behind a reverse proxy.
# If you're running inside a Docker container behind Traefik or Nginx, for example, add the subnet of your docker network,
# or the gateway of the docker network, and/or the address of the reverse proxy (if it's not running on the host network).
# Example: ["127.0.0.1/32", "172.20.0.1"]
# Default: ["127.0.0.1/32", "::1"] (localhost ipv4 + ipv6)
trusted-proxies:
- "127.0.0.1/32"
- "::1"